Specifications subject to change without notice. Digital Light Processing and DLP are trademarks of Texas Instrumets. Attachment plate . . . . Angle adjuster...... Adjuster pole A ..... Adjuster pole B ..... Projector mount bracket Pole fixer......................1 Safety fitting....................1 Washer-fitted screws (M6 x 12).....29 Washer-fitted screws (M4 x 8).......4 Caution: Mounting should be done by a qualified technician. Make sure that the mounting (ceiling) area has suf

Raise the front adjustment foot slightly slide the projector bracket under the foot. lower the foot snug against the bracket. Locate the 4mm mounting holes located on the bottom of the projector. Secure the mounting bracket with the two (2) 4mmx10mm min (supplied) Phillip screws tighten to (4kg-cm). The hinge pin openings must face the lens of the projector. Align the holes from the strap to the threaded points on the side of the mounting bracket and secure using the two (2) 4mmx10mm Phillip scr

Includes: (2) steel chassis sleeves, (2) aircraft-grade plastic-sheathed braided-steel cables, keyed steel lock box. Cables are routed through the steel chassis sleeves. Works with PBL projector mounts. Adapter PP-SEC PP-SEC50 Additional Steel Cables For PP-SEC and PP-SEC50. Choose from 16" and 50" lengths of steel security cable. Or call inside sales at 800.368.9700 for a custom length for $1.50 per foot. Suggested List $ 5.99 $14.99 50

Available in dark gray. PP-TBL Suggested List: $199.99 Chassis Sleeve Security System 18" steel cable. Includes: (1) cable looper guide, (1) steel chassis sleeve, (1) key cylinder lock. PCB-CSL1 Suggested List: $39.99 SECURITY DEVICES Dual-Cable Security Device This security device's unique design secures the mounting points on the chassis as well as two of the mounting points at the ceiling or wall. Includes: (2) steel chassis sleeves, (2) aircraft-grade plastic-sheathed braided-steel

Spring-loaded locking mechanism prevents removal of projector. Projector is held securely in upright position for easy viewing. Unit can rotate 360° to show all projector features. Unique design prevents access to mounting points - both on the counter and on the projector. Includes universal projector mount assembly that works with any projector you wish to display. Available in dark gray. PP-TBL Suggested List: $199.99 Chassis Sleeve Security System 18" steel cable. Includes: (1) cable loop

Wt. Retail PBM-LPS2 250 lbs. $824.99 Dual-Stacker for Mid-Sized Projectors • Accommodates medium projectors up to 18" wide • Allows maximum ventilation • Mounts to the ceiling or rests on a tabletop • Adjustable feet provided for table top placement • Fits PDS Series projector mount (not included) Model Max. Wt. Retail PBM-LPS1 250 lbs. $649.99 Dual-Stacker For Smaller Projectors • Mounts to the ceiling • Allows maximum ventilation • 180° projector rotation for precise placement •

Wt. Retail PBM-LPS1 250 lbs. $649.99 Dual-Stacker For Smaller Projectors • Mounts to the ceiling • Allows maximum ventilation • 180° projector rotation for precise placement • Accommodates medium projectors up to 91/2" tall (with mount) • Requires PDS Series or PDS Plus Mounts (not included) Model Max. Wt. Retail PP-STKR 100 lbs. $194.99 Premier Mounts* -20.000- -6.000- PBM-LPS2 PP-STKR All measurements are In Inches (mm) 800.368.9700 I www.mounts.com

Miraloma Ave. Anaheim, CA 92806 Phone: (800) 368-9700 Fax: (800) 832-4888 techsupport@mounts.com 1. Invert the projector and place it on a soft and flat surface. Remove any foot levelers that might possibly prevent the correct installation of the bracket. 2. Locate the four mounting points located on the bottom of the projector. 3. Line up the mounting points on the projector with the mounting holes on the PDS-009 mounting bracket. 1. Using a screwdriver, secure the PDS-009 mounting bracket

They feature four double-jointed support arms that allow flexible positioning to reach any mounting point. This unique design can mate with our optional adjustable-height suspension adapter (APL-2647) to extend the length of the channel up to 47” from the ceiling. Cables can be routed inside channel for a neat appearance. Plus, it’s backed by our industry-leading Lifetime Guarantee. Features • Fits most projectors under 25 lbs • +/-20° tilt and roll; 360° Rotation • Mounts to walls and trad

Miraloma Ave. Anaheim, CA 92806 Phone: (800) 368-9700 Fax: (800) 832-4888 techsupport@mounts.com 1. Invert the projector and place it on a soft and flat surface. Remove any foot levelers that might possibly prevent the correct installation of the bracket. 2. Locate the three mounting points located on the bottom of the projector. 3. Line up the mounting points on the projector with the mounting holes on the PDS-010 mounting bracket. 1. Using a screwdriver, secure the PDS-010 mounting bracke