Instead screw the ceiling mount to a secure joist or use a 1/2“painted wood butch plate secured to the joists and the • I • / i t II ceiling mount screwed to the butch plate. After screwing the ceiling mount to the ceiling thread the knuckle assembly on to the ceiling mount. With a alien wrench, slightly loosen the knuckle assemble screw. 4. Using the three supplied nylon spacers, mount the triangle shaped projector mount on the projector With the enclosed bolts and lock washers. Be sure to

Be sure to use the lock washers. Tighten but do not over tighten the screws. 5. Thread the projector mount onto the knuckle assembly (mounted on the ceiling mount) and spin the projector until it is tight. Spin the projector up to one more complete turn until it is facing the correct direction and the allen nut is also facing the screen. Turn the projector on and horizontally and vertically adjust the projector until the image fills the screen. Tighten the knuckle assembly with the allen wre

I I___________-V______J Screws (not provided) Allen bolt Knuckle assembly Hex bolt X 3 Lock washer X 3 Nylon spacer X 3 DELUXE CEILING CM10/24/25 MOUNT KIT Congratulations for choosing this HDTV projector. To assure correct installation, please follow these instructions carefully. if you have questions or comments, please don't hesitate to call or write your Knoll dealer. Knöll Systems 145 Tyee Drive, Point Roberts, WA 98291 11791 Machrina Way, Richmond BC V7A 4V3 tel (604) 272 455