Log:
Trier : Nom ↑   Téléchargements   Évaluation   Taille ↑  
Téléchargements : 0   Taille : 3 mb   Fabricant : Pioneer  
Catégorie : Projecteurs
@name

• Automatically selects the convergence memory as follows. For NTSC input:MEMORY 1 For PAL input:MEMORY 2 Horizontal frequency 20 kHz to 28 kHz input:MEMORY 3 Horizontal frequency 28 kHz to 35 kHz input :MEMORY 4 When TV SYSTEM=NTSC • The convergence memory is always set to MEMORY 1 regardless of the input signal. When TV SYSTEM=PAL • The convergence memory is always set to MEMORY 2 regardless of the input signal. In standard settings, MEMORIES 1 to 4 are selected as described above,

Téléchargements : 0   Taille : 3 mb   Fabricant : Pioneer  
Catégorie : Projecteurs
@name

• An damage during shipping will be compensated for only in the case where Pioneer's specific packing materials for shipping are used. • The guarantee of performance is applicable only when the assembly and adjustment described in this technical manual and the adjustment described by the system manual of RM-V2000 have been carried out. R 0 MANUAL. This Acrobat (IE: a PDF file) version of the Pioneer RM-V4000 / 5000 manual was made from the original digital document and scanning an existing manua

Téléchargements : 7   Taille : 3 mb   Fabricant : Pioneer  
Catégorie : Projecteurs
@name

0.286 to 4.0 Vp-p 2 Composite video signal Video level ....................... 0 to 0.714 Vp-p (75ohm) Single level..............................0.286 Vp-p (75ohm) *Terminate switch, throughout RS-232C control input 25-pin D-SUB Output signal Output video signal 16-line (RMD-V3216), 9-line (RMD-V3109) .. BNC terminal 1 Composite sync signal ................. 1.0 Vp-p (75ohm) 2 Y/C separation signal Y (With sync) ................................. 1.0Vp-p (75ohm) C (With burst) Burst level .......

Téléchargements : 6   Taille : 3 mb   Fabricant : Pioneer  
Catégorie : Projecteurs
@name

3-11) • Never drag the system along the floor when moving the units. • The lenticular sheet damages very easily as it is very thin. Therefore move it gently and do not apply excessive shock or vibration to it. • As the panels supporting the screen are very thin and deform easily, be careful that they do not hit or get hooked onto surrounding objects when moving them. 3. PRECAUTIONS FOR TRANSPORTATION Do not stack the units on their sides or backs when transporting them. Always place them upright





catégories