Évaluations - 3, GPA: 4.7 ( )

Fabricant : LG Taille : 10.75 mb Nom Fichier : Langue d'enseignement:

Each time that you change the air outlet filter we advise you to remove the motor filter(23)and to clean it by tapping to remover the dirt and then replacing it in the vacuum cleaner. Cleaning the exhaust filter (24) • Check the exhaust filter occasion-ally and clean when dirty. • Unplug cord from outlet. • Open the exhaust cover and remove exhaust filter as shown. • Next procedures are the same as the moter safety filter. • Turbine brush nozzle (25). •Easy & Powerful cleaning through adjusting the air-control lever (26). K=r' > : use for hard floor & short type carpet. (fODDODDOD : use for long type carpet. • Cleaning turbine brush nozzle (27) Press the button on the rear side of the nozzle to separate the air cover. Use the dusting brush & crevice tool to vacuum clean the brush and fan. WARNING Please never close the Filter Cover like (28), To avoid nipping your hand. What to do if your appliance does not work? Check that the appliance is correctly plugged in and that the electrical socket is working. What to do when the suction performance reduces? ■ Stop the appliance and unplug it. • Check that the tubes, flexible hose and cleaning tool are not blocked. • Check that the dust bag is not full.Replace if necessary. 6 I E CLEANING THE DUST TANK AND FILTER ASSEMBLY For best cleaning results, the dust tank should be cleaned often. 1.Unplug cord from wall outlet. 2. Pull lid release out and up, then lift filter cover. 3. Pull the dust tank assembly (29) up. 4. Push the release lever (30) of the filter assembly (31) and pull it out of the dust tank (32). 5. Wash the dust tank with sponge or soft cloth under cold running water. 6. Brush (33) is for cleaning the filter assembly(31). It is on the back of the filter assembly. 7. Pull the filter supporter (34) down from the filter assembly (31). 8.Clean the filter assembly (31) and the filter supporter (34) with the brush under cold running water. Do not use detergent or wash in washing machine or dishwasher. 9.Allow the filter assembly (31 ) and filter supporter (34)to dry in shaded location for a day. Do not tumble or spin dry, nor microwave or place in oven or in path of direct heat. Ensure both the filter and filter supporter are completely dry before placing it back into the vacuum. HOW TO FIT THE BAG MOUNT AND THE DUST BAG If you want to use a dust bag instead of the dust tank, please: 1.Unplug cord from wall outlet. 2.Pull the cover release out and up, then lift canister hood. 3.Pull the dust tank assembly (29) up. 4. Fit the bag mount (21) with the spring, ensure the bosses on both sides of the bag mount into the slots near the handle on the base. 5.To fit a bag push the cardboard support of a new bag into the bag mount until it will go no further - 7 - •I Информация для Вашей безопасности Пожалуйста, прочтите следующую информацию, содержащую важные инструкции относительно техники безопасности, эксплуатации и обслуживания аппарата. Данный аппарат о...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :