|
Photos et spécifications LG FVD 3050 |
Facilité d'utilisation
Please do not use force! ■ Do not vacuum flammable or explosive substances(liquids or gases). ■ Do not vacuum hot ash, embers etc. nor sharp objects. ■ Do not vacuum water or other liquids. How to Use Connecting the flexible hose Push the end of the head(1) on the flexible hose(2) into the attachment point on the vacuum cleaner. To remove the flexible hose from the vacuum cleaner, press on the button(3) situated on the head, then pull upwards. Assembling the tubes (depending on model) ■ Metal(or Plastic) Pipe(4) - Fit together the two tubes by twisting slightly. ■Telescopic tube(5) - Push spring latch(6) forward. - Pull out tube to required length. - Release spring latch to lock. Using the cleaning head and Accessory Nozzles (depending on model) Fit the large cleaning head onto the end of the tube. ■ The 2 position head(7) is equipped with a pedal(8) which allows you to alter its position according to the type of floor to be cleaned. Hard floor position(tiles, parquet floors...). Press on the pedal to lower the brush. Carpet or rug position. Press on the pedal to lift the brush up. ■ Crevice Tool(9) For vacuuming in those normally inaccessible places i.e. reaching cobwebs, or down the side of a sofal • Dusting brush(10) For vacuuming picture frames furniture outlines, books and other uneven objects. ■ Upholstery Nozzle(11) For vacuuming uphostery, mattresses, etc. The thread collectors help to pick up the threads and fluff. How to plug in and use Pull out the supply cord to the desired length and plug into the socket. Press button (14) to start the vacuum cleaner. To stop it press the button (14) again. Adjusting the power level ■ If your appliance is equipped with an electronic variable power control(13), you can choose the power appropriated for the task. The more you slide the button towards the right, the greater the suction power. • The flexible hose handle(15) has a manual air flow regulator(16) which allows you to briefly reduce the suction level. Storage(17) When you have switched off and unplugged the appliance, press on the button (12) to automatically rewind the cord. You can move or store your appliance in a vertical position by sliding the hook on the large cleaning head into the clip on the underside of the appliance. - 5 - E | Changing the dust bag The dustbag needs changing when the cleaner is set to maximum power and the cleaner head is off the floor but the “bag full” indicator window(18) is completely coloured red. Even if the dustbag does not appear to be full at this stage, it should be changed. It could be that a great deal of very fine dust has clogged up the pores of the dust bag. • Turn off the appliance and unplug it. • Open the cover by pressing the hook(19) and lifting it up until it snaps into place. Your appliance is equipped with either a paper dust bag (20) or a fabric dust bag (22)(depending on model). • Take hold of the dust bag by the handle and pull.Remove the bag an...
Ce manuel est également adapté pour les modèles :Aspirateurs - V-C3E4*N***/S*** (10.75 mb)
Aspirateurs - V-C3E5*N***/S*** (10.75 mb)
Aspirateurs - V-C3E6*N***/S*** (10.75 mb)
Aspirateurs - FVD 3060 (10.75 mb)