Évaluations - 2, GPA: 4.5
(
)
)
|
Facilité d'utilisation
Failure to clean the dust bin could cause permanent damage to the cleaner. (Depending on model) Don ’t grasp the tank handle when you are moving the vacuum cleaner. The vacuum cleaner s body may fall when separating tank and body. Personal injury or product damage could result. You should grasp the carrier handle when you aremoving the vacuum cleaner. (Depending on model) If after emptying the dust tank the indicator light is on(red), clean the dust tank. Failure to do so could result in product damage. (Depending on model) - 6 - IMPORTANT SAFETY INSTRUCTIONS A CAUTION Thermal protector : This vacuum cleaner has a special thermostat that protects the vacuum cleaner in case of motor overheating. If the vacuum cleaner suddenly shuts off, turn off the switch and unplug the vacuum cleaner. Check the vacuum cleaner for possible source of overheating such as a full dust tank, a blocked hose or clogged filter. If these conditions are found, fix them and wait at least 30 minutes before attempting to use the vacuum cleaner. After the 30 minute period, plug the vacuum cleaner back in and turn on the switch. - 7 - El How to Use Connecting the flexible hose Push the end of the head(1) on the flexible hose(2) into the attachment point on the vacuum cleaner. To remove the flexible hose from the vacuum cleaner, press on the button(3) situated on the head, then pull upwards. Assembling the tubes (depending on model) * Metal(or Plastic) Pipe(4) - Fit together the two tubes by twisting slightly. •Telescopic tube(5) - Push spring latch(6) forward. - Pull out tube to required length. - Release spring latch to lock. Using the cleaning head and Accessory Nozzles (depending on model) Fit the large cleaning head onto the end of the tube. * The 2 position head(7) is equipped with a pedal(8) which allows you to alter its position according to the type of floor to be cleaned. Hard floor position(tiles, parquet floors...). Press on the pedal to lower the brush. Carpet or rug position. Press on the pedal to lift the brush up. * Crevice Tool(9) Flexible Crevice Tool (optional)(13) For vacuuming in those normally inaccessible places i.e. reaching cobwebs, or down the side of a sofa! * Dusting brush(10) For vacuuming picture frames furniture outlines, books and other uneven objects. * Upholstery Nozzle(11) For vacuuming uphostery, mattresses, etc. The thread collectors help to pick up the threads and fluff. * Accessory Holder (12) can be attached on the Extention wands using clamping hook. Accessories can be stored in the holder. How to plug in and use Pull out the supply cord to the desired length and plug into the socket. Tune the slide knob on the flexible handle from " OFF" place to the upper place. And then adjust the power level what you need. Adjusting the power level • Electronic power control (14) OFF: Power of MIN: Low power MAX: Full power Storage (15) When you have switched off and unplugged the appliance, press on the button (16) to automatically rewind the cord. You can move or store your appliance in a vertical position by sliding the hook on the large cleaning head into the clip on the underside of the appliance. Changing the dust bag The dustbag needs changing when the cleaner is set to maximum power and the cleaner head is off the floor but the “bag full” indicator window (17) is completely coloured red. Even if the dustbag does not appear to be full at this stage, it should be changed. It could be that a great deal of very fine dust has clogged up the pores of the dust bag. • Turn off the appliance and unplug it. • Open the cover by pressing the hook(18) and lifting it up until it snaps into place. Your appliance is equipped with either a paper dust bag (19) or a fabric dust bag (21) (depending on model). • Take hold of the dust bag by the handle and pull.Remove the bag and throw it away. • To refit a new bag push the cardboard support of a new bag into the bag mount (20) until it will go no further. 8 - IE If your appliance is fitted with a fabric dust bag follow the same instructions as above. Empty it and replace it (21). Note: as the appliance is fitted with a safety device which checks that the bag is in place you cannot close the lid if the bag is not fitted correctly. Cleaning the motor filter The motor filter is situated inside the appliance between the dust bag and the motor. Each time that you change the air outlet filter we advise you to remove the motor filter(22)and to clean it by tapping to remover the dirt and then replacing it in the vacuum cleaner. Changing the air outlet filter • To change these filters remove the cover of the filter compartment (23) situated at the inner of the appliance. * Cleaning the washable HEPA filter with water at least once a year. WARNING 25 To avoid nipping your hand. Please do not hold the hose when we lift the main body off the floor (26). What to do if your appliance does not work? Check that the appli...
Ce manuel est également adapté pour les modèles :Aspirateurs - VC37203HQ (18.27 mb)