Évaluations - 0, GPA: 0 ( )

Fabricant : Philips Taille : 6.85 mb Nom Fichier : Langue d'enseignement:

the seats of chairs and sofas. -Use the small brush nozzle to clean computers, bookshelves etc. accessory holder 1 2 Snap the accessory holder onto the handgrip (Fig. 14). Snap two accessories into the accessory holder: -Crevice tool and small nozzle (Fig. 15). Note:The small nozzle must be placed in the accessory holder as shown in the picture. -Crevice tool and small brush (Fig. 16). using the appliance 1 2 Pull the cord out of the appliance and put the mains plug in the wall socket. Press the on/off button on top of the appliance with your foot to switch on the appliance (Fig. 17). adjusting suction power During vacuuming, you can adjust the suction power. -Use maximum suction power to vacuum ver y dir ty carpets and hard floors. -Use minimum suction power to vacuum cur tains, table carpets, etc. suction power knob -During vacuum cleaning, you can adjust the suction power with the suction power knob on top of the appliance (Fig. 18) Pausing during use 1 If you want to pause for a moment, insert the ridge on the nozzle into the parking slot to park the tube in a convenient position (Fig. 19). English storage 1 2 3 4 5 Slide the tube parts into each other to reduce the tube to its shortest length. Switch off the appliance and remove the mains plug from the wall socket. Press the cord rewind button to rewind the mains cord (Fig. 20). To store the appliance in upright position, insert the ridge on the nozzle into the storage slot (Fig. 21). Always put the TriActive nozzle in the carpet setting when you store it (brush strip retracted into the nozzle). Also prevent the side brushes from becoming bent (Fig. 12). replacing the dustbag Always unplug the appliance before you replace the dustbag. Note: In some cases, the dustbag-full indicator can indicate that the dustbag is full, even though it is not. This may occur if the pores of the dustbag are clogged (e.g. when you have vacuumed ashes, fine sand, lime, cement dust and similar substances) or if something blocks the nozzle, tube and/or hose. If the pores of the dustbag are clogged, you have to replace the dustbag, even if it is not full yet. If the dustbag is not clogged but not full either, something blocks the nozzle, tube and/or hose. In this case, do not replace the dustbag but remove the obstruction. replacing the dustbag -Replace the dustbag as soon as the dustbag-full indicator has changed colour permanently, i.e. even when the nozzle is not placed on the floor (Fig. 22). 1 Pull the cover upwards to open it (Fig. 23). 2 Lift the dustbag holder out of the appliance (Fig. 24). Make sure you hold the holder with the dustbag in horizontal position when you lift it out of the appliance. Pull at the cardboard tag to remove the full dustbag from the holder (Fig. 25). The dustbag is sealed automatically. Slide the cardboard front of the new dustbag into the two grooves of the dustbag holder as far as possible. (Fig. 26) Put the dustbag holder back into the vacuum cleaner. 3,4 5 Note: If you have not inserted a dustbag, you cannot close the cover. Cleaning and maintenance of filters The plug must be removed from the socket-outlet before you clean or maintain the appliance. Note: Only wipe the body of the appliance with a moist cloth. Permanent motor protection filter To guarantee optimal performance, clean the permanent motor protection filter ever y time you replace the dustbag. Note: Replace the motor protection filter once a year. 1 2 Remove the dustbag holder with the dustbag (Fig. 24). Press the filter holder release tab (1) and take the filter holder out of the appliance (2).Take the motor protection filter out of the filter holder. (Fig. 27) 10 English 3 4 5 Shake the filter over a dustbin to clean it. Put the clean filter back into the filter holder. Fit the two lugs of the filter holder behind the ridge at the bottom to ensure that it fits properly at the top (1).Then press home the filter holder (2) (Fig. 28). Place the dustbag holder with the dustbag back into the appliance. ultra Clean air HePa 13 filter This appliance is equipped with the Ultra Clean Air HEPA 13 filter.This filter is located in the back of the appliance and is able to remove 99.9% of all par ticles down to 0.0003mm in size from the outlet air.This not only includes normal house dust, but also harmful microscopic vermin such as dust mites and their excrements, which are well-known causes of respirator y allergies. Note: Replace the HEPA 13 filter once a year. replacing the HePa 13 filter 1 Open the filter grille (Fig. 29). 2 Remove the old filter (Fig. 30). 3 Insert the new filter into the appliance. 4 Close the filter grille and push the bottom corners until they snap home (Fig. 31). Ordering accessories If you have any difficulties obtaining filters or other accessories for this appliance, contact the Philips Consumer Care Centre in your countr y or consult the worldwide guarantee leaflet. ordering dustbags -Philips s-bag® classic long performance dustbags last 50% longer than st...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :