Serious personal injury can occur if someone picks up and uses the nailer without knowing the correct way to operate the nailer. Do not drop or throw the tool. Dropping or throwing the tool can result in damage that will make the tool unusable or unsafe. If the tool has been dropped or thrown, examine the tool closely for bent, cracked or broken parts and air leaks. STOP and repair before using or serious injury could occur. Caution indicates a potentially hazardous situation which, if not avoi

Avoid using the nailer when the magazine is empty. Accelerated wear on the nailer may occur. Clean and check all air supply hoses and fittings before connecting the nailer to an air supply. Replace any damaged or worn hoses or fittings. Tool performance or durability may be reduced. Air compressors providing air to the nailer should follow the requirements established by the American National Standards Institute Standard B19.3-1991; Safety Standard for Compressors for Process Industries. Cont

La herramienta NS289100 y NS289500 tambien coloca sujetadores disenados para: Sears 18420, Atro Helen 90CH, and Bostitch F28WW, N100S, N865, N805, N16. La herramienta NS349000 tambien coloca sujetadores disenados para: Porter Cable FC 350A, Hitachi NR83AA2, Senco FramePro 701XP, 751XP , Ridgid R350CHA, DeWalt D51822, D51823 y Paslode F-3505. Recommended Hookup Quick Coupler Air Hose Quick Plug (Optional) Quick Coupler (Optional) Oiler Regulator Filter Quick Plug Hay una fuga de aire en el area d

4. Use a pressure regulator on the compressor, with an operating pressure of 0 - 125 psi. A pressure regulator is required to control the operating pressure of the nailer between 70 and 120 psi. NO-MAR DECKING TIP The no-mar decking tip is designed to eliminate marks caused by the serrated work contact element (WCE). The nomar tip may be removed if not required (See REMOVING NO-MAR DECKING TIP). Use tool in single cycle mode (SEE OPERATIONAL MODES) when no-mar tip is in place. 70 psi Min. OIL 1