Log:
Évaluations - 3, GPA: 4 ( )

Instructions Cisco Systems, Modèle TRIPLE 3725

Fabricant : Cisco Systems
Taille : 1.2 mb
Nom Fichier :
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


2. Enter the alarm time in 24 hour format. 2. Press

and to select EQLIZER. 4. Press to confirm. All entries will be deleted and the display will show EMPTY. full, the oldest call will be replaced by a new call. Any unanswered calls which have not been viewed and M3. > at the top of the display. 3. Press to display SNOOZE. 3. Press and to select NORMAL, BASS or TREBLE. are marked with a < 4. Press to enter a new number or edit the number stored already. 4.7 Check the Contacts Usage 6.1.2 Change the Time Format 4. Press and to show ON or OFF. 4. Press to confirm the setting. You can check how many contact entries and stored in your handset and how many spaces are 1. Press to access the call list. 5. Press to confirm 1. Press and to show CLOCK. 5. Press to confirm your setting. 6.3.6 Select Base and then to select it. Or Press then to show CALL LOG , available for you to store in the Contacts list. 2. Press to select the desired entry. 2. Press and to select TIME FMT. 6.3 Handset Settings If you have registered the handset to more than one base, you can select any one of them to 6.3.12 Set the Mailbox Number 1. Press to show CONTACTS and then press to enter the contacts list. 3. Press and then to choose a time format of either 12HR or 24HR. use with your your handset. 3 Press <#> to view the caller’s number if applicable. 7.3.1 Set the Ringer Melody for Internal Calls Note: you can only use the handset with one base at any one time. You can store a number of up to 20 digits, which can be dialled out directly from idle mode 2. Press and to select CAPACITY. 4. Press to confirm your choice. 4. Press then to show DETAILS, and then to display 1. Press and to select HS SET. by pressing and holding the digit <1> key for more than 2 seconds. This may be used to 1. Press and to select HS SET. the date of the call. Press < # > to see the time of the call, and press < MENU/OK> to return 6.1.3 Set the Time 2. Press and to select RINGER. 2. Press and to select SEL BASE. store your network voice mail number, such as 1571, for easy access to that service. 3. Press to display how much of the contacts phonebook is being used, for example <14/20> means 14 entries are stored out of the total of 20 available spaces to the name or number. 3. Press and to select INT RING. 1. Press and to select HS SET. 3. Press and to select the desired base. 1. Press and to show CLOCK. 4.8 Set the Fast Dial Numbers (Note: the currently selected base is indicated by a *.) 4. Press and to select the ringtone you want to hear for internal 2. Press and to select MAILBOX. 5.2 Store a Call Log Number into the Contacts 2. Press and to select SET TIME. Up to 8 of your Contact entries can be allocated to a fast dial key (from 2 to 9), where you can 1. Follow Steps 1 and 2 in Section 5.1. 3. Press and then to enter the time information in 24 hour format. calls. 4. Press to confirm. Note: the handset may take a short while to search for the new 3. Press and then enter a new number or edit the mailbox number. dial the number from idle mode by simply pressing and holding the appropriate digit key for 2. Press and to show STORE. 4. Press to confirm your setting. Note: There are 10 ring tones, and each will play as you step through the list. base. 4. Press to confirm. more than 2 seconds. If no fast dial number is stored, you will hear a double-beep tone when 3. Press and then to enter the name. 5. Press < MENU/OK> to confirm. 6.3.7 Set the Handset Language Note: If time has been set before, the current time will display, otherwise, “HH:MM” will display. 6.4 Base Settings the key is held down. 4. Press and the selected call log number is displayed. The language used on the handset display may be changed from English, if required. 6.4.1 Set the Base Ringer Melody 6.3.2 Set the Ringer Melody for External Calls 5. Edit the number if necessary. 6.1.4 Set the Date 4.8.1 Add or Edit the Fast Dial Number 1. Press and to select HS SET. 1. Press and to select BS SET. 6. Press and to select the ringtone. 1. Press and to show CLOCK. 1. Press and to select HS SET. 1. Press to show CONTACTS and then press to enter the 2. Press and to select LANGUAGE. 2. Press and to select RINGER. 7. Press to sto...

Ce manuel est également adapté pour les modèles :
Téléphones sans fil - TRIPLE TWIN (1.2 mb)
Téléphones sans fil - TRIPLE 3725 (1.2 mb)
Téléphones sans fil - TRIPLE 3725 (1.2 mb)
Téléphones sans fil - TRIPLE 3725 (1.2 mb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories