Instructions BT, Modèle TRIPLE TWIN

Fabricant : BT
Taille : 1.2 mb
Nom Fichier :

Langue d'enseignement:

Aller à la télécharger

Facilité d'utilisation

Press

and to select TAM. selected option is indicated with a * ) Note: If PULSE dialling is set, you can press the * key to switch to TONE dialling for the 2. Press and to select ON/OFF. message playback. 7.5.5 Set the Answer Delay the new registration will overwrite it.) 5. Press to confirm. rest of that call. 3. Press and to select ON or OFF. Press to stop message playback. 5. Press to display PIN?----. You can set the number of rings before the answering machine answers and starts playing 1. Press and to select BS SET. 4. Press to confirm. Press once to repeat playing the current message from the beginning. 7.5.2 Set the Outgoing Message(OGM) Language your OGM. You can set the answering machine to answer after two to eight rings or time 6. Enter the 4-digit system PIN (default is 0000). If the answering machine is set to ON, the TAM icon < 2. Press and to select DIALMODE. > displays on the handset screen Press twice to skip back to play the previous message. The answering machine announces the outgoing message(OGM) when it answers a call. saver (TS). If time saver (TS) is set, the answering machine will answer after 6 rings 7. Press to confirm, and the display will show SEARCH'G. 3. Press and to select TONE or PULSE. and the message counter on the base station will display the number of incoming messages. Press to skip to play next message. There is a pre-set OGM foreach of ANS&REC mode or ANSONLY mode, which can be in if there are no new messages already recorded, or after 2 rings if there is a new message, If the answering machine is set to OFF, the TAM icon < 4. Press to confirm. If the handset registration is successful, the display will change to standby mode with > will not appear on the handset Press to delete the current message playing, and start playing the next message. English or French (FRANC,) on this model. so if you call in for remote access and it doesn't answer after 2 or 3 rings, you can hang the new handsetnumber a nd the will stop flashing. screen and the message counter on the base station will display --. 6.4.5 Change the Recall(Flash) Time 1. Press and to select TAM. up and save on call charges. The handset will automatically be allocated the next available handset number. If the 7.3 Delete All Messages in the Answering Machine You may need to change the recall (flash) time if your phone is connected to a PBX. 7.2 Listen to the Messages in the Answering Machine 2. Press and to select SETTINGS. Note: If your network voice messaging service (e.g. BT 1571) is enabled, you will need to handset registration is unsuccessful, the will still flash. Delete all messages using the Base: When new messages are recorded on the answering machine, the TAM icon < > flashes on 3. Press and to select LANGUAGE . The recall time options are SHORT (the default value of 100ms), MID (300ms) or set the ring delay on your BB3725 to less than 6 rings, otherwise the network service will LONG (600ms). 6.6 Reset Your Phone the handset display and the message counter on the base flashes with the number of new In idle: 4. Press and to select ENGLISH or FRANC, answer and record incoming calls, and prevent the BB3725 from recording them. messages in the answering machine until all the new messages are played. Old messages will be 1. Press and hold on the base station until a long beep is played. 1. Press and to select BS SET. You can reset your phone to the default settings. After reset, all your personal settings 5. Press to confirm. 1. Press and to select TAM. played after all new messages are played completely. The message counter LED stays steady to 2. All the old messages will be deleted. 2. Press and to select FLASH. including your PIN numbers, the redial list and call log entries will be deleted, and all 7.5.3 indicate the number of old messages stored in the answering machine. Note: If three short beeps are heard, there were no old messages to delete. New messages will Record Your Own Outgoing Message (OGM) 2. Press and to select SETTINGS 3. Press and to select your desired recall(flash) time (SHORT, MID, answering machine messages will be erased, but your phonebook remains unchangeed, 3. Press and to select ANS DLAY not be deleted. If there are no more messages in the answering machine, “00’’ will display on the You can record your own OGM for ANS&REC mode or ANSONLY mode. When you record LONG). Listen new messages through the Base: although the direct memory keys (M1-3) and the Mailbox (key 1) memory will be 4. Press and to select fro...

Ce manuel est également adapté pour les modèles :
Téléphones sans fil - TRIPLE TWIN (1.2 mb)
Téléphones sans fil - TRIPLE 3725 (1.2 mb)
Téléphones sans fil - TRIPLE 3725 (1.2 mb)
Téléphones sans fil - TRIPLE 3725 (1.2 mb)

Voir tous