Log:
Téléchargements : 0   Taille : 1 mb   Fabricant : Cisco Systems  
Catégorie : Téléphones sans fil
@name

During an external call or internal call, if an alarm is set and when the alarm time is reached, Key Tone -a single beep is emitted when you press a key. the name. service provider. Your phone can store up to 10 received calls with date/time information in the Call the way you like it to work. the < > and “ALARM ON ” will still flash. An alarm tone will be emitted from the earpiece If you turn on the Auto Answer, you can answer a call automatically by just lifting the Low Battery Tone -emitted w

Téléchargements : 1   Taille : 1 mb   Fabricant : Cisco Systems  
Catégorie : Téléphones sans fil
@name

2. Enter the alarm time in 24 hour format. 2. Press

and to select EQLIZER. 4. Press to confirm. All entries will be deleted and the display will show EMPTY. full, the oldest call will be replaced by a new call. Any unanswered calls which have not been viewed and M3. > at the top of the display. 3. Press to display SNOOZE. 3. Press and to select NORMAL, BASS or TREBLE. are marked with a < 4. Press to enter a new number or edit

Téléchargements : 0   Taille : 4 mb   Fabricant : Cisco Systems  
Catégorie : Téléphones sans fil
@name

A de-registered handset will have the antenna flashing and REGISTER on the display. Note: You cannot de-register the handset that you are currently using. 1. Press

and to select BS SETTINGS. 2. Press and to select DELETE HS. 3. Press and the display shows PIN?—- 4. Enter the 4-digit system PIN. 5. Press and the first handset number is displayed. 6. Press to step through the list of registered handsets, and select the nu

Téléchargements : 4   Taille : 2 mb   Fabricant : Cisco Systems  
Catégorie : Téléphones sans fil
@name

base unit or access your answering machine remotely. . The default PIN is 0000; you can change it to any four-ditgit number you' ll remember. Press the MENU then the ^ or Ў button to go to . BASE Press the PHONE/OK button twice • The display shows . PIN 2 • The display shows . PIN. NEW Key in the new PIN and confirm using 4 PHONE/OK button The display shows . Pin NEW Key in the new PIN again and confirm using PHONE/OK button 5 • The PIN code is changed after ‘beep’. (If you key in a wrong PIN c

Téléchargements : 1   Taille : 2 mb   Fabricant : Cisco Systems  
Catégorie : Téléphones sans fil
@name

18 5 Paging and Intercom Use (for multi cordless handset systems) You can locate cordless handsets from the corded base or from other cordless handsets, and you can make intercom calls between cordless handsets, or transfer calls between cordless handsets, or set up a conference call between two cordless handsets and an external caller, provided you have more than one cordless handset registered to your base. Note: You cannot make or receive intercom calls, transfers or conference calls with the

Téléchargements : 3   Taille : 2 mb   Fabricant : Cisco Systems  
Catégorie : Téléphones sans fil
@name

4.9 Redial Last The handset saves the last 5 numbers called. If you have stored a name in the phonebook to go with the number, the name will be displayed instead. The most recent last number will display at the top of the redial list. 16 4.9.1 Redial a Number from the Redial List 1. In idle mode, press to access the redial list. Note: If the redial list shows a name, press the < # > key to view thenumber of this entry. 2. Press to browse the redial list. 3. Press /

Téléchargements : 1   Taille : 2 mb   Fabricant : Cisco Systems  
Catégorie : Téléphones sans fil
@name

The 4-digit remote access PIN code is used to prevent other people from unauthorised access of your answering machine. The default remote access PIN is 0000. 9.5.7.1 Change the 4-Digit Remote Access PIN 1. Press

and to select Answer Machine. 2. Press and to select TAM Settings. 3. Press and to select Chg Remote PIN. 4. Press and then enter the Old remote access PIN (Default Remote Access PIN is 0000). Note: If the Old remote acce

Téléchargements : 1   Taille : 246 kb   Fabricant : Cisco Systems  
Catégorie : Téléphones sans fil
@name

When there are no more records, the display shows empty . 8 Press MENU to go back to standby mode ¦ The caller’s number (up to 20 digits). The number won’t be displayed if the Handset ringing melodies network they’re calling from doesn’t support this feature; or if they’ve withheld their number by dialling 141. If the caller’s number wasn’t available, To change the ringing melody for incoming external calls: Base unit ringing volume the display shows a row of dashes. • phonebk 1 Press MENU • pho

Téléchargements : 3   Taille : 155 kb   Fabricant : Cisco Systems  
Catégorie : Téléphones sans fil
@name

Groups can have special ring tones assigned to them. 1. Press PHONEBOOK. 2. Use CID/UP or CID/DOWN to scroll to the desired entry. 3. Press MENU. NEW ENTRY is displayed. 4. Press CID/UP until SELECT GROUP is displayed. 5. Press MENU. DEFAULT GROUP is displayed. 6. Use CID/UP or CID/DOWN to scroll to the desired group. The choices are DEFAULT, VIP, FAMILY, FRIEND, and COLLEAGUE. 7. When the desired group is shown, press MENU. The unit will beep to confirm and the phone number will be displayed. 8

Téléchargements : 0   Taille : 107 kb   Fabricant : Cisco Systems  
Catégorie : Téléphones sans fil
@name

OUT-OF-WARRANTY REPAIR We will repair this product for a nominal fee after the LIMITED WARRANTY has expired if you send it to us in a complete and undamaged condition. The repaired Telephone will be shipped to you C.O.D., freight collect. RETURN-FOR-REPAIR PACKAGING If you are returning a unit to us for repair, package it carefully, in the original carton. Be sure to include your return address, a copy of the sales receipt showing date-of-purchase, and a note describing the problem you have with





catégories