Évaluations - 5, GPA: 4.2 ( )

Fabricant : IBM Taille : 532.75 kb Nom Fichier : usersguidet221converter.pdf Langue d'enseignement:

This manual describes the preparation required before using the converter box, how to connect the converter box to the monitor, how to adjust the monitor, and what to do if a problem occurs. Trademarks DVI is a trademark of the Digital Display Working Group (DDWG). EDID is a trademark of the Video Electronics Standard Association (VESA). ATI, FireGL, and RADEON are trademarks or registered trademarks of ATI Tec hnologies Inc. TMDS is a trademark of Silicon Image Incorporated. nVIDIA, Quadro, FX-1000, FX-2000, and FX-3000 are trademarks or registered trademarks of nVIDIA Corporation. 2 P/N: 55P5776 Precautions for using the converter box safely and correctly DANGER To avoid electrical shock: l• Never remove the cover of the converter box. l• Never connect or disconnect the converter box during an electrical storm. l• Any equipment to which the converter box is attached must also be connected to properly wired and grounded electrical outlets. l• The monitor to which the converter box is connected must be unplugged at the wall to disconnect it from the power supply. Connect the power plug into an easily accessible outlet. 3 P/N: 55P5776 DANGER Sequence for connecting and disconnecting cables Electric current from the power cords and communication cables is hazardous. To avoid any risk of electrical shock, always connect and disconnect the cables as shown below when installing or moving the converter box or connected equipment, or when connecting other equipment. Connecting cables Disconnecting Power everything off. Power everything off. First, attach the power cord and First, unplug the power cord from cables to the equipment. the wall outlet. Next, disconnect all cables from connectors. Next, attach the signal cables to connectors. Lastly, disconnect the power cord and cables from the equipment. Lastly, plug the power cord into a wall outlet. Power everything on. End 4 P/N: 55P5776 Contents 1. Preparation for Installation...............................................................................................6 1.1. Required System Configuration.................................................................................6 1.2. Checking Parts........................................................................................................6 2. Connecting the Converter Box .........................................................................................7 2.1. Disconnecting the Existing Digital Signal Cable ..........................................................7 2.2. Connecting the Converter Box Display Signal Cables ..................................................8 2.3. Setup ................................................................................................................... 11 3. Changing the Monitor EDID Setting ............................................................................... 11 4. Troubleshooting ..................................................................................................

Téléchargez votre

Pour télécharger, entrez 2 chiffres :