Évaluations - 2, GPA: 3.5
(
)
)
|
Facilité d'utilisation
EBGDAEBDAF# DAD- EBG# EBE- DBGDGD- EC# AEAE- EBGDAD- DAGDAD-7th6th5th4th3rd2nd1st101516171819OPEN EOPEN GOPEN DOPEN ADADGADDROP DBASSCGDAEB4thLo-B3rd2nd1stHi-CCDC#D# G#A#BAF#GEF2 Owner’s Manual Thank you, and congratulations on your choice of the BOSS TU-1000 Stage Tuner. Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (supplied on a separate sheet). These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, this manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. Copyright © 2009 BOSS CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of BOSS CORPORATION. ..Main Features •Ultra-smooth, accurate motion and superior brightness of the meter’s large-size LEDs makes tuning fast and easy •Includes the Accu-Pitch sign function, which uses the motion of the meter’s lights to show when tuning is completed •Choose from two selectable display modes: “CENT,” where the LED meter functions like a needle-type meter, and "STREAM," in which the lights’ stream-like motion indicates when notes are out of tune. •Switching on the tuner automatically mutes the output signal, allowing you to tune without outputting the sound •Handles open tunings, DADGAD, and other alternate tunings, as well as flat or “down” tunings up to six semitones below standard tuning •Supplies power to up to six effects processors •Connecting an external footswitch lets you switch the tuner on and off remotely ..How to Use the Tuner 1.Connect the instrument you want to tune to the TU-1000’s INPUT jack (this switches on the power). 2.Press [MODE] to select the tuning mode. Mode Description Displayed CHROMATIC Permits tuning to any of the twelve semitones. The note name is displayed. GUITAR Allows tuning by guitar string numbers. The string number is displayed. BASS Allows tuning by bass string numbers. OPEN D–A Enables open guitar tunings. DROP D Enables DROP D guitar tuning. DADGAD Enables DADGAD guitar tuning. For more on the note names in each tuning mode, refer to the Tuning Mode Note Name List. 3.Press the TUNER ON/OFF switch to turn the tuner on. 4.Play a single note on the instrument. The note name or string number for the note closest to the tone being played appears in the display. The meter and Tuning Guide show how far the note is from the correct pitch. 5.Tune the instrument. When the desired note name or string number appears in the display, tune the instrument so that both Tuning Guide indicators are lit and the pitch matches that displayed by the meter. When you reach a stable pitch, the meter’s lights then stream to the center from the left and right, indicating that tuning is completed (Accu-Pitch sign function). *The display method varies depending on the display pattern selected for the meter. Tuning to a Flat Tuning Press [FLAT TUNING] to lower the actual pitch one or more semitones below the note shown in the display. Each press of the button changes the display, from no flat symbols (regular tuning) to “” (lowered one semitone), “” (lowered two semitones), and so on down to “” (lowered six semitones). Changing the Reference Pitch When you press [PITCH], the lowest digit of the current reference pitch (“0” when set to 440 Hz) starts to flash in the Note Name/ String Number display. Each time you press [PITCH] while the display is flashing, it changes the reference pitch by 1 Hz; you can adjust the pitch over a range from 436 Hz to 445 Hz. ..Switching the Meter Display Pattern Each time you press [DISPLAY], the meter display alternately switches between the CENT and STREAM patterns. CENT Display The light moves further to the left the more the pitch of the input note drops; as the pitch rises, the light moves further to the right. STREAM Display The movement of the light to the left or right indicates how far the input note is out of tune. The light streams to the left when the input pitch is flat and to the right when it is sharp. The movement of the light slows down as the note approaches the correct pitch, then stops when you reach the correct pitch. ..Convenient Functions Using the Meter Display to Indicate Tuning is Completed (Accu-Pitch Sign Function) The TU-1000 features an Accu-Pitch sign function that uses the meter display to indicate that tuning is complete after the pitch stabilizes at the correct pitch. When tuning is completed, the lights stream toward the center from the left and right. Switching the Accu-Pitch Sign Function On and Off 1.Turn off the power (unplug the instrument from the INPUT jack). 2.Hold down [DISPLAY] and turn on the power (plug the instrument into the INPUT jack). The [DISPLAY] indicator lights up. 3.Press [DISPLAY] to switch the Accu-Pitch Sign function on and off. *W...
Ce manuel est également adapté pour les modèles :Instruments de musique - TU-1000 (3.9 mb)