Log:
Évaluations - 3, GPA: 4.3 ( )

Instructions Curtis, Modèle 175

Fabricant : Curtis
Taille : 455.92 kb
Nom Fichier : 8403bccd-e48d-4f0c-9809-b3293975ffa2.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


1-3 Wiring Instructions.............................................Pp. 4,5 Operating Instructions....................................... Pp. 6,7 Fast-Cast 175 Schematic Assembly.................. P. 8 Fast-Cast 175 Assembly & Wiring Instructions.. Pp. 9-11 Drop Utility Mount Schematic Assembly............ P. 12 3-Point Hitch Mount Schematic......................... P. 13 Fast-Cast 2000 Schematic Assembly................ P. 14 Fast-Cast 3000 Schematic Assembly................ P. 15 Drive Assembly Schematic................................ P. 16 Fast-Cast 4000 Schematic Assembly................ P. 17 Swing Away-Pivot Mount Schematic................. P. 18-20 Troubleshooting................................................ P. 21 Spreader Maintenance...................................... P. 22 Fast-Cast 175 Application: SALT, DEICERS, FREE FLOWING MATERIAL Fast-Cast 2000 Application: SALT, DEICERS, FREE FLOWING MATERIAL Fast-Cast 3000 Application: SALT, DEICERS, FREE FLOWING MATERIAL Fast-Cast 4000 Application: 100% SAND, SAND/SALT MIX Curtis Tractor Cab, Inc. and/or Curtis International, Inc. reserves the right to change product design or specifications without notice or liability. Curtis snowplows and truck equipment should only be used on vehicles equipped with the manufacturer. s snowplow preparation package. Snowplowing without the original snowplow preparation package may damage your vehicle and the added weight of the equipment may impair the operation and control of the vehicle. CURTIS PRODUCTS ARE PROTECTED UNDER THE FOLLOWING PATENT NUMBER: 5815956. OTHER PATENTS PENDING TRACTOR CAB INC. TRACTOR CAB INC. 111 Higgins Street Worcester, MA 01606 Tel: (800) 343-7676 Fax: (800) 876-9104 Safety WARNING CAUTION Before attempting any procedure in this book, these safety instructions must be read and understood by all workers who have any part in the preparation or use of this equipment. For your safety warning and information decals have been placed on this product to remind the operator of safety precautions. If anything happens to mark or destroy the decals, please request new ones. Remember most accidents are preventable and caused by WARNING human error. Exercising of care and precautions must be observed to prevent the possibility of injury to operator or others! Never operate equipment when under the influence of alcohol,WARNING drugs, or medication that might alter your judgment and/or reaction time. Before working with the spreader, secure all loose fitting clothing WARNING and unrestrained hair. Always wear safety glasses with side shields when working metalWARNING against metal. Failure to do this could result in serious injury to the eyes or other parts of the body. August 2001 1161 TRACTOR CAB INC. TRACTOR CAB INC. Safety (continued) WARNING CAUTION Never allow children to operate or climb on equipment. Never weld or grind on equipment without having a fire extinguisher available. Always check areas to be spread to be sure no hazardous conditions or substances are in the area. Always inspect unit for defects: broken, worn or bent parts, weakened areas on spreader or mount. Always shut off vehicle and power source before attempting to attach or detach or service spreader unit. Be sure vehicle/powerWARNING source is properly braked or chocked. Always make sure personnel are clear of areas of dangerWARNING when using equipment. Always keep hands, feet, and clothing away fromWARNING power-driven parts. Remember it is the owner’s responsibility to communicate information on safe usage and proper maintenance of all equipment. August 2001 1162 TRACTOR CAB INC. TRACTOR CAB INC. WARNING CAUTION CAUTION WARNING WARNING Safety Precautions Never exceed 45 m.p.h. when loaded spreader is attached to vehicle. Braking distances may be reduced and handling characteristics may be impaired at speeds above 45 m.p.h. Never use wet materials, or materials with foreign debris in the Fast-Cast 175, Fast-Cast 2000, and Fast-Cast 3000. These units are designed to handle dry, clean, free-flowing material. Note: Can not spread water softner salt. Never leave material in hopper for long periods of time. Be aware that all ice melters are hygroscopic and will attract atmospheric moisture and harden up. Always inspect pins, and latches whenever attaching or detaching spreader, and before traveling. Inspect the unit periodically for defects. Parts that are broken, missing, or worn out must be replaced immediately. The unit, or any part of it should not be altered without prior written permission from the manufacturer. August 2001 1163 TRACTOR CAB INC. Wiring Instructions STEP 1: TAKE HARNESS ASSEY.AND ROUTE FROM THE REAR OF THE VEHICLE TO THE FRONT. ROUTE HARNESS ALONG FRAME AND ATTACH TO FRAME HOLES AND FRAME SUPPORTS. IT IS NOT RECOMMENDED TO ATTACH TO FUEL OR BRAKE LINES FOR OBVIOUS REASONS. DO NOT ROUTE CLOSE TO EXHAUST SYSTEM OR ENGINE, EVEN THOUGH CURTIS USES HIGH TEMPRETURE WIRING IT STILL COULD MELT UNDER EXTREME HEAT AND ...

Ce manuel est également adapté pour les modèles :
Outils de jardin - 2000 (455.92 kb)
Outils de jardin - 3000 (455.92 kb)
Outils de jardin - 4000 (455.92 kb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories