Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
4 Known problems and limitations
The following problems are known to exist in version B.11.31.1109:
•
ServiceGuard support is not enabled for NC552m in version B.11.31.1109.
ServiceGuard support is not enabled for the NC552m adapter in this initial release.
ServiceGuard will be enabled in a future release of the iocxgbe driver.
NOTE:
ServiceGuard is fully supported on the NC551m Converged Network Adapter.
•
Problems occur when using SNAP (Sub-Network Access Protocol) encapsulation with VLANs.
(QXCR1001061473)
Severity: Medium
SNAP encapsulation enables protocols such as TCP/IP to use an IEEE802.3 SNAP header.
This protocol works correctly for non-VLAN devices. For VLAN devices, when a minimum size
SNAP packet is received and the VLAN tag is removed, the device incorrectly flags the packet
as undersized and discards it.
Workaround: None. This problem might be corrected in a future release of the 10GigEthr-03
bundle.
•
Multi-queue operation is not available on all functions.
Severity: Medium
Multi-queue enables traffic to be partitioned across CPUs. The CNA supports only receive
multi-queue operation. Multiple queues are supported only on the first PCIe function for each
port: function 0 (port 0) and function 1 (port 1).
The iocxgbe driver sets the number of receive queues for each of these PCIe functions to 5;
the default was 1 prior to this release. The number of queues for each remaining PCIe function
is 1 and remains 1.
5 Compatibility and installation requirements
This section describes the compatibility information and installation requirements for this release.
5.1 Operating system and version compatibility
This release is specific for HP-UX 11i v3, Application Release B.11.31.1009 or later.
5.2 Hardware requirements
This version of 10GigEthr-03 runs on HP Integrity BL8x0c i2 server blades with the HP-UX 11i v3
(B.11.31) operating system. To support profile migration on NC551m adapters, Virtual Connect
(VC) firmware version 3.17 or later is required.
6 Related information
HP references
The latest documentation for Ethernet and CNA cards is available in English at:
http://www.hp.com/go/10-gigabit-ethernet-docs
Other references
For additional information about configuring and updating UEFI functionality on these product,
see the Emulex Boot Manual on Emulex website, at:
http://www.emulex.com/files/downloads/hardware/boot_manual.pdf
6
... Ce manuel est également adapté pour les modèles :
Matériel de réseau - HP Converged Network Adapters (CNA) (177.25 kb)
Matériel de réseau - HP-UX 11i v3 I/O Cards (177.25 kb)
données dispositifs de traitement - HP CN1000E Dual Port Converged Network Adapter (177.25 kb)
données dispositifs de traitement - HP CN1000Q Dual Port Converged Network Adapter (177.25 kb)