Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
•
An HP StorageWorks 2300 series enclosure is not seen in sautil and saconfig command
output.
An MSA2300 storage enclosure and the configured LUNs are not seen from the outputs of
sautil /dev/cissX or saconfig /dev/cissX commands. You cannot use sautil and
saconfig to configure the MSA2300 storage enclosure.
Corrective Action: Use the StorageWorks 2300 web-based interface or CLI to manage the
enclosure and LUNs.
For more information, see the HP StorageWorks 2300 Modular Smart Array CLI reference guide
or the HP StorageWorks 2300 Modular Smart Array reference guide. These documents are
available on the HP Business Support Center website at:
http://bizsupport.hp.com
Search for “MSA2300”.
•
SAS Storage Enclosure Status display issue in sautil command output.
SAS storage enclosures (SES devices) and their status appear in the outputs of sautil
/dev/cissX (extensive output) or sautil /dev/cissX -s (shortened output) commands.
Devices appear in the SAS/SATA DEVICE SUMMARY section, and in the detailed information
provided for each DISK device and SES device in the command output.
The status of a SAS SES device is always FAILED. The FAILED status does not indicate that
the enclosure is not functioning. It means that it is not a DISK device.
Corrective Action: None. You can continue to use the SAS storage enclosures. You can also
use sautil to download enclosure firmware when needed.
For more information, see the HP Smart Array P400 and P800 Controller Support Guide at:
http://docs.hp.com/en/netcom.html
•
HP-UX installation fails.
Installation of HP-UX 11i v3 fails when installing to an array of eight 146 GB SAS disks
configured as a single RAID 0 logical volume.
Corrective Actions:
— Option 1: Install patch PHCO_36555. Patches are available from the HP IT Resource
Center, at:
http://itrc.hp.com/
Under “Maintenance and Support,” click the Patch Database link, then search for the
patch number. For more information on how to manage and install patches, see the
Patch Management User Guide for HP-UX 11.x Systems at:
http://docs.hp.com/en/oshpux11iv3.html
— Option 2: Reconfigure the RAID 0 logical drive to use seven or fewer 146 GB disks.
5 Compatibility and Installation Requirements
This section describes the compatibility information and installation requirements for this release.
For specific installation instructions, see the installation guide or support guide for your controller.
These documents are listed in the “Related Information” section.
5.1 Required Software
•
OS Platform and Version Compatibility
Before installing the Smart Array Controller software, install a supported HP-UX Operating
System. To determine the supported HP-UX versions for your system, see the HP Smart
Array RAID Controllers Support Matrix at:
5 Compatibility and Installation Requirements
7
... Ce manuel est également adapté pour les modèles :
Matériel de réseau - HP-UX 11i v3 I/O Cards (307.32 kb)