Log:
Évaluations - 3, GPA: 4 ( )

Instructions Campbell Hausfeld, Modèle TL0504

Fabricant : Campbell Hausfeld
Taille : 1.34 mb
Nom Fichier :
Langue d'enseignement: enesfr
Aller à la télécharger



Facilité d'utilisation


This dust often contains chemicals known to cause cancer, birth defects, or other reproductive harm. Wear protective gear. This manual contains information that is very important to know and under-stand. This information is provided for SAFETY and to PREVENT EQUIPMENT PROBLEMS. To help recognize this information, observe the following symbols. Danger indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury. Warning indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury. Caution indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury. Notice indicates important information, that if not followed, may cause damage to equipment. This product is a part of a high pressure system and the following safety precautions must be followed at all times along with any other existing safety rules. 1. Read all manuals included with this product carefully. Be thoroughly familiar with the controls and the proper use of the equipment. 2. Only persons well acquainted with these rules of safe operation should be allowed to use the air tool. Do not exceed the maximum operating pressure of the air tool (90 PSI). This can reduce MANUAL the life of the tool. 3. Do not exceed any pressure rating of any component in the system. Maximum operating pressure of 90 PSI is measured at the tool inlet while the tool is running. The pressure drop between the compressor and tool needs to be compensated for at the compressor. 4. Disconnect the air tool from air supply before changing tools or attachments, servicing and during non-operation. Safety glasses and ear protection must be worn during operation. 5. Do not wear loose fitting clothing, scarves, or neck ties in work area. Loose clothing may become caught in moving parts and result in serious personal injury. 6. Do not wear jewelry when operating any tool. Jewelry may become caught in moving parts and result in serious personal injury. 7. Do not depress trigger when connecting the air supply hose. 8. Always use attachments designed for use with air powered tools. Do not use damaged or worn attachments. 9. Never trigger the tool when not applied to a work object. Attachments must be securely attached. Loose attachments can cause serious injury. 10. Protect air lines from damage or puncture. 11. Never point an air tool at oneself or any other person. Serious injury could occur. 12. Check air hoses for weak or worn conditions before each use. Make sure all connections are secure. Release all pressure from the system before attempting to install, service, relocate or perform any maintenance. 13. Keep all nuts, bolts and screws tight and ensure equipment is in safe working condition. 14. Do not put hands near or under moving parts. 15. Always secure workpiece in a vise or clamp. Do not misuse this product. Excessive exposure to vibration, work in awkward positions, and repetitive work m...

Ce manuel est également adapté pour les modèles :
Les machines à rectifier - TL1004 (1.34 mb)
Les machines à rectifier - TL1005 (1.34 mb)
Les machines à rectifier - TL1118 (1.34 mb)
Les machines à rectifier - FHT504 (1.34 mb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories