Log:
Téléchargements : 0   Taille : 300 kb   Fabricant : Global Machinery Company  
Catégorie : Les machines à rectifier
@name

This product is warranted for a 2-year period for home domestic use from the date of the original purchase. If found to be defective in materials or workmanship, the tool or the offending faulty component will be replaced free of charge with another of the same item. A small freight charge may apply. The warranty replacement unit is only made available by returning the tool to the place of purchase with a confirmed register receipt. Proof of purchase is essential. We reserve the right to reject

Téléchargements : 1   Taille : 385 kb   Fabricant : Global Machinery Company  
Catégorie : Les machines à rectifier
@name

Main handle 3. Dust extraction canister 4. Hook & loop base 5. Paper clamp 6. Variable speed control 7. Front handle 8. Handle lock 9. Hole punch 10. Dust extraction adaptor 11. Sandpaper (2 x 80G) 1 6 2 7 8 3 5 4 10 9 11 Unpacking Due to modern mass production techniques, it is unlikely that your GMC Power Tool is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do so could result

Téléchargements : 2   Taille : 295 kb   Fabricant : Global Machinery Company  
Catégorie : Les machines à rectifier
@name

• When sanding wood, always connect the dust extraction filter. • Take special care to guard against harmful and toxic dusts when sanding lead-based painted surfaces, woods and metals, including the following: - All persons entering the work area must wear a mask specially designed for protection against toxic dust and fumes such as those arising from the sanding of lead paint . - Children and pregnant women must not enter the work area. - Do not eat, drink or smoke in the work area. • Before us

Téléchargements : 4   Taille : 353 kb   Fabricant : Global Machinery Company  
Catégorie : Les machines à rectifier
@name

Washable dust bag 11. Hole punch 8 10 2 3 11 1 9 7 6 4 5 Unpacking Due to modern mass production techniques, it is unlikely that your GMC Power Tool is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal injury. Switching on and off 1. With the cordset fitted to a power outlet, switch the sander on by pressing the “I” mark on the protective cover

Téléchargements : 2   Taille : 373 kb   Fabricant : Global Machinery Company  
Catégorie : Les machines à rectifier
@name

Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. • Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could result in a hazardous situation. Service • Have your power tool serviced by a qualified repa

Téléchargements : 0   Taille : 2 mb   Fabricant : Global Machinery Company  
Catégorie : Les machines à rectifier
@name

Wear goggles Wear ear defenders Wear a breathing mask 5 Contents of carton The GMC ROS400A Random Orbital Sander is supplied with the following accessories as standard: • 5 x 80 grit hook & loop sanding sheets • Dust bag • Instruction manual Unpacking Due to modern mass production techniques, it is unlikely that your GMC Power Tool is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure

Téléchargements : 0   Taille : 948 kb   Fabricant : Global Machinery Company  
Catégorie : Les machines à rectifier
@name

1. Turn the sander upside down and remove the four hex screws using the hex key (9) provided. Take off the base assembly. 2. Place the replacement base assembly on the tool and secure it with the 4 hex screws using the hex key (9) supplied. Fitting a sanding sheet WARNING. Always ensure that the tool is switched off and the plug is removed from the power point before making any adjustments or maintenance procedures. 1. Before fitting sandpaper, remove any dust or debris from the base. 2. Match t

Téléchargements : 1   Taille : 947 kb   Fabricant : Global Machinery Company  
Catégorie : Les machines à rectifier

Téléchargements : 1   Taille : 220 kb   Fabricant : Global Machinery Company  
Catégorie : Les machines à rectifier
@name

Holding and guiding the tool 1. Always clamp the work piece. 2. Do not overload the tool so that the disc slows down. Let the tool do the work rather than applying pressure. The weight of the tool alone provides sufficient pressure. 3. Cutting discs become very hot when in use. Take care not to touch them until they have cooled down. 4. Hold the tool securely and make sure that you have full control at all times. 5. During a cutting operation, maintain an angle of 30 to 40 degrees between the to

Téléchargements : 0   Taille : 518 kb   Fabricant : Global Machinery Company  
Catégorie : Les machines à rectifier
@name

Warranty 2 Introduction 3 Environmental protection 3 Description of symbols 3 Specifications 3 Safety instructions 4 Additional safety rules for sanders 5 Unpacking 6 Contents of carton 6 Assembly 6 Know your product 7 Switching on and off 8 Attaching a sanding sheet 8 Selecting the right grade of sanding belt 8 Sanding 9 Dust extraction 10 General inspection 10 Cleaning 10 Description of symbols The rating plate on your tool may show symbols. These represent important information about the prod





catégories