Premier has manufactured trimmers for more than 50 years. During that time continuous-improvement engineering has led to virtually every major advance in trimmers. From our original wood boards, to the new PT12 Personal Paper Trimmer and TrakCut™ 512, every Premier trimmer is designed to give you years of reliable service. WARNING - Read and thoroughly understand this publication in its entirety before attempting to operate your trimmers. The trimmer blade is sharp. Never place your hands or fi

From our original wood boards, to the new PT12 Personal Paper Trimmer and TrakCut™ 512, every Premier trimmer is designed to give you years of reliable service. WARNING - Read and thoroughly understand this publication in its entirety before attempting to operate your trimmers. The trimmer blade is sharp. Never place your hands or fingers near the cutting area when operating your trimmer. Never allow others to place their hands of fingers near the cutting area when operating your trimmer. Never

Never allow children to operate a trimmer without adult supervision. Always latch the blade in the closed position when not in sue. Misuse of this product can cause serious bodily injury. For best cutting results, us Trim-Ease Blade Lubricant on your trimmer blades. Trim-Ease helps provide a smoother cut, reduces friction, and preserves the life of the cutting blade. Trim-Ease will not mark or stain the materials being trimmed and can be used on virtually any paper trimmer, even older models.

(Scales are calibrated in both inch and metric measurements, grid lines are calibrated in 1 / 2” increments). 5. Hold the material securely in place with your left hand to ensure in remain flat and square on the trimmer base. On the StakCut Models (715 and 724) the paper is held securely in place by the clamp. Apply pressure to the clamp handle (item 45) as you follow step six. Warning - Make sure your fingers are not in the path of the trimmer blade!!! 6. Lower the blade with a firm, steady

Trim-Ease helps provide a smoother cut, reduces friction, and preserves the life of the cutting blade. Trim-Ease will not mark or stain the materials being trimmed and can be used on virtually any paper trimmer, even older models. II. Setup Place the trimmer on a stable, flat surface such as a table or desk top and allow ample room for safe operation. Keep the area free from objects that may interfere with the safe operation of the trimmer. III. Operation 1. Firmly grasp the handle with your

Trim-Ease helps provide a smoother cut, reduces friction, and preserves the life of the cutting blade. Trim-Ease will not mark or stain the materials being trimmed and can be used on virtually any paper trimmer, even older models. II. Setup Place the trimmer on a stable, flat surface such as a table or desk top and allow ample room for safe operation. Keep the area free from objects that may interfere with the safe operation of the trimmer. III. Operation 1. Firmly grasp the handle with your

• Leave the key for the safety lock with the person responsible for the cutting machine. • Power operated cutting machines must be operated only by trained and reliable personnel. Part of the training is to become familiar with the operating instructions. • The operating instructions must be accessible at any time and must be strictly observed. • Do not reach into cutting area while the knife is in operation. • Change knife and cutting stick only with the main switch in “off” position. For other

IMPORTANT – Only by clamping the paper pile securely is precise cut guaranteed. · Back gauge (#22) The back gauge is spindle-guided for easy and precise adjustment with the crank (#3). When squaring the paper pile avoid using excessive force against the back gauge otherwise the back gauge could be knocked fractionally out of the pre-set dimension and the guide piece of the back gauge is subjected to unnecessary wear. · Back gauge crank (#3) The crank is indirectly connected with the back gauge s

• Mount the hand wheel for the paper clamp (#19) and the crank for the back gauge (#3). Secure these parts with provided screws. • Connect power cord with plug to a normal single phase AC socket. The machine is now ready to be operated. Performance All paper qualities and light cardboard can be cut using the full cutting height and cutting length of the machine. 4810 4810-11 5210 Cutting Length 475 mm (18-3/4”) 520 mm (20-1/2”) Cutting Height 80 mm (3-1/8”) 80 mm (3-1/8”) Table depth 460 mm (18

These high quality cutters have been carefully engineered to provide years of service with a minimum of maintenance. Dahle Cutters use only the highest quality Solingen Steel blades, ground and tempered to exacting standards. Each cutter has been carefully assembled and tested to meet Dahle’s highest standards. For more information about Dahle products contact ABC Office at 1800-658-8788. WARRANTY NOTE: Unless the Warranty Card is properly and promptly filled out and mailed, you will not be p