Évaluations - 4, GPA: 4.3 ( )

Fabricant : ABC Office Taille : 75.77 kb Nom Fichier : Langue d'enseignement:

• Mount the hand wheel for the paper clamp (#19) and the crank for the back gauge (#3). Secure these parts with provided screws. • Connect power cord with plug to a normal single phase AC socket. The machine is now ready to be operated. Performance All paper qualities and light cardboard can be cut using the full cutting height and cutting length of the machine. 4810 4810-11 5210 Cutting Length 475 mm (18-3/4”) 520 mm (20-1/2”) Cutting Height 80 mm (3-1/8”) 80 mm (3-1/8”) Table depth 460 mm (18-1/8”) 520 mm (20-1/2”) Narrow cut 30 mm (1-3/16”) 35 mm (1-3/8”) Features and Operation • Main Switch (#11) 3 Turn main switch (#11) to position “|” (on), in order to begin operation. The main switch can be sued as an EMERGENCY SWITCH, which stops the machine immediately. · Safety lock with key (#6) The key can be removed to prevent unauthorized use. To activate the machine, turn key 45. to the right. · Re-set button (#12) Before the knife can be activated on models IDEAL 4810 and IDEAL 5210, the re-set button has to be pressed to re-establish the “ready to cut” status of the machine. The yellow pilot light in the viewing window (#14) comes on and indicates, that the machine s is ready for use. The model IDEAL 4810-11 does not have a re-set button. · Two-hand operation Only by pressing the right and the left push button switch (#5) simultaneously (within half a second), can a cut be executed. Keep push buttons (#5) depressed until the knife has reached it lowest position. As soon as the push buttons have been released, the knife returns automatically to its home position. · Automatic knife return If a cut cycle is interrupted by releasing both push button switches (#5), the knife returns automatically to its home position. IF only one of push buttons is released, the knife stops in the reached position until the second push button is released as well. · Spindle clamp system The clamp holds the paper pile in position while cutting. The paper clamp (#15) is lowered and raised by turning the hand wheel (#19). By turning the wheel clockwise: the clamp is lowered. By turning the wheel counter clockwise: the clamp is raised. The paper is clamped by tightening the hand wheel (#19) with a quick pull to the right. IMPORTANT – Only by clamping the paper pile securely is precise cut guaranteed. · Back gauge (#22) The back gauge is spindle-guided for easy and precise adjustment with the crank (#3). When squaring the paper pile avoid using excessive force against the back gauge otherwise the back gauge could be knocked fractionally out of the pre-set dimension and the guide piece of the back gauge is subjected to unnecessary wear. · Back gauge crank (#3) The crank is indirectly connected with the back gauge spindle. The crank is engaged by applying slight pressure toward the machine. The connection is released by pulling the crank towards the operator. If the crank is disengaged, the back gauge setting cannot be changed inadvertently. Turn to the right: back gauge mov...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :