Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
IMPORTANT • When installing Musicsoft Downloader to Windows XP, 2000 or Vista, make sure to log on to the Administrator account. •To install Musicsoft Downloader, your computer must be connected to the Internet and be online. 1 Insert the included CD-ROM into the CD-ROM drive of the computer. The Start window will appear on the screen. Each menu on the window indicates the application or data contained in the Accessory CD-ROM. 2 Click “Musicsoft Downloader” on the Start window. The page which explains the details about Musicsoft Downloader is displayed on the window. 3 Click “Musicsoft Downloader Homepage” button at the bottom of the window. The Download page on the web is displayed. Verify that your system meets the requirements before installing the software. n For the instrument including this Accessory CD-ROM, you can use only the Musicsoft Downloader as a file transfer application software. Other applications such as File Utility and Song Filer cannot be used. 6 Accessory CD-ROM for Windows Installation Guide Troubleshooting The driver cannot be installed. • Is the USB cable connected correctly? >Check the USB cable connection. >Disconnect the USB cable, then connect it again. • Is the USB function enabled on your computer? >When you connect the instrument to the computer for the first time, if the “Add New Hardware Wizard” does not appear, the USB function on the computer may be disabled. Perform the following steps. 1 Select [Start] > [Control Panel]* > [System] > [Hardware] > [Device Manager] (for Windows XP), or select [Start] > [Settings] > [Control Panel] > [System] > [Hardware] > [Device Manager] (for Windows 2000), or select [Start] > [Control Panel] > [Device Manager] (for Windows Vista). * Classic View only in Windows XP. 2 Make sure that no “!” or “x” marks appear at “Universal Serial Bus Controller” or “USB Root Hub.” If you see an “!” or “x” mark, the USB controller is disabled. • Is any unknown device registered? >If driver installation fails, the instrument will be marked as an “Unknown device,” and you will not be able to install the driver. Delete the “Unknown device” by following the steps below. 1 Select [Start] > [Control Panel]* > [System] > [Hardware] > [Device Manager] (for Windows XP), or select [Start] > [Settings] > [Control Panel] > [System] > [Hardware] > [Device Manager] (for Windows 2000), or select [Start] > [Control Panel] > [Device Manager] (for Windows Vista). * Classic View only in Windows XP. 2 Look for “Other devices” in the menu “View devices by type.” 3 If you find “Other devices,” double-click it to extend the tree to look for “Unknown device.” If one appears, select it and click the [Remove] button. 4 Remove the USB cable from the instrument, and make the connection again. 5 Install the driver again. (See page 4.) When controlling the instrument from your computer via USB, the instrument does not operate correctly or no sound is heard. • Did you install the driver (page 4)? • Is the USB cable connecte...
Ce manuel est également adapté pour les modèles :Synthétiseur / piano, - CVP503 (256.53 kb)