ITEM Spark plug gap Valve clearance Other specifications MAINTENANCE Refer to page: 45 See your authorized Honda dealer 0.028 0.031 in (0.7 0.8 mm) IN: 0.15 0.02 mm EX: 0.20 0.02 mm (varies with snow conditions) (varies with snow conditions) Specifications are subject to change without notice. .. .. .. .. .. .. .. 71 TECHNICAL & CONSUMER INFORMATION Frame Engine Tuneup HS928 TA TAS WA WAS SZAS 28.5 in (725 mm) 40.9 in (1,038 mm) 41.0 in (1,042 mm) 231 lbs (105 kg) 240 lbs (109 kg) 28.0 in (710 m
-All Rights Reserved I II I II I II I Ill Thank you for purchasing a Honda snowthrower. We want to help you get the best results from your new snowthrower and to operate it safely. This manual contains the information on how to do that; please read it carefully. Thank you for purchasing a Honda snowthrower. We want to help you get the best results from your new snowthrower and to operate it safely. This manual contains the information on how to do that; please read it carefully. This manual shou
— All Rights Reserved A WARNING: A The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Thank you for purchasing a Honda snowblower. We want to help you get the best results from your new snowblower and to operate it safely. This manual contains the information on how to do that; please read it carefully. This owner's manual describes the operation and maintenance of Honda HS622 snowblower. All in
The OPEN position provides the correct fuel mixture for operation after starting, and for restarting a warm engine. CHOKE KNOB CLOSED OPEN Shift Lever The shift lever selects F (FORWARD), N (NEUTRAL), or R (REVERSE). The shift lever also controls the transmission drive ratio; moving the lever farther from NEUTRAL increases drive speed. While clearing snow, use the shift lever to control drive speed, so you can leave the throttle lever in the FAST position for best snow-clearing performance. R (R
Inspect or seivice as described on the next page. l• Shut off the engine before performing inspection and maintenance, and disconnect the spark plug wire from the plug so the engine cannot be started. l• If the engine must be run, make sure the area is well ventilated. Exhaust gas contains poisonous carbon monoxide; exposure can cause loss of consciousness and may lead to death. l• To avoid overturning, place the snowthrower on a level surface before performing inspection and maintenance. l• Use
This kit features a halogen bulb (replacement bulbs available) and includes all hardware and instructions. Order from Parts Division snowthrower model Honda code part number HS624, HS724 4155628 06350-767-100AH HS622TA 5335211 06600-743-800 HS828, HS928 4124400 06350-768-000AH Order from Parts Division Description Honda code part number Replacement bulb 4125886 34901-768-000AH AUGER RUBBER PARTS For easier servicing, here’s a complete auger rubber parts list. The auger rubber shoul
All information in this publication is based on the latest product informa- tion available at the time of approval for printing. Honda Motor Co., Ltd. reserves the right to make changes at any time without notice and without incurring any obligation. No part of this publication may be reproduced without written permission. This manual should be considered a permanent part of the snowblower and should remain with the snowblower if it is resold. READ THIS OWNER’S MANUAL CAREFULLY. Pay special atte
Maintenance, replacement, or repair of the emission control devices and systems may be performed by any engine repair establishment or individual, using parts that are ‘‘certified’’ to EPA standards. .. .. .. 35 SERVICING YOUR SNOWBLOWER MAINTENANCE SAFETY Injury from moving parts. Burns from hot parts. Carbon monoxide poisoning from engine exhaust. Safety Precautions Some of the most important safety precautions follow. However, we cannot warn you of every conceivable hazard that can arise in p
Loosen (don’t remove) the drain screw until the fuel starts to drain. Drain until the fuel tank is empty, then tighten the drain screw. A WARNING Gasoline is highlyflammable and explosive. You can be burned or seriously injured when handling fuel. • Keep heat, sparks, and flame away. • Handle fuel only outdoors. • Wipe up spills immediately. 32 STORAGE Engine Oil 1. Change the engine oil (page 24). 2. Remove the spark plug (page 25). 3. Pour a tablespoon (5 ~ 10 cc) of clean engine o
All Honda warranty details are explained in the Distributor’s Limited Warranty. Normally, any problems concerning the product will be handled by your dealer’s service department. If you have a warranty problem that has not been handled to your satisfaction, we suggest you take the following action: • Discuss your problem with a member of dealership management. Often complaints can be quickly resolved at that level. If the problem has already been reviewed with the Service Manager, contact the