Évaluations - 2, GPA: 3 ( )

Fabricant : Beko Taille : 760.95 kb Nom Fichier : Langue d'enseignement:

C For further program details, see “Program Selection Table” Economy Symbol Shows energy saving programs and temperature selections. As “Intensive” and “Baby” programs are long programs with higher temperature selections to ensure hygiene, “Economy” Symbol (Figure 3-13g) will not light up. Special programs For specific applications, you can select any of the following programs: • Rinse This program is used when you want to rinse or starch separately. • Spin This program spins with maximum possible rpm in the default setting. A You should use a lower spin rpm for delicate laundries. • Pump This program is used to discharge the water of the clothes soaked into water in the machine. Temperature selection Whenever a new program is selected, the temperature anticipated for that e program appears on the temperature indicator (13b). To change the temperature, press the temperature button (Figure 2-9). Temperature falls with 10° decrements. Cold selection is shown with “-” symbol. When the “Temperature” button is pressed after coming to the Cold selection, the maximum temperature of the program you have selected will be displayed. To decrease the temperature, press the “Temperature” button again. 90.C Normally soiled, white cottons and linens. (Ex.: coffee table covers, tablecloths, towels, bed sheets) 60.C Normally soiled, fade proof colored linens, cottons or synthetic clothes (Ex.: shirts, nightgowns, pajamas) and lightly soiled white linen clothes (Ex.: underwear) 40.C- 30°C- Cold For delicate clothes (Ex.: veil curtains), blended clothes including synthetics and woolens. Spin Speed selection Whenever a new program is selected, the maximum spin speed of the selected program is displayed on the spin speed indicator (Figure 3-13a). To decrease the spin speed, press the “Spin” button (Figure 2-7). Spin speed decreases gradually. Then, rinse hold and no spin options are shown respectively. Rinse hold is shown with “” and no spin is shown with “” symbols. If you do not want to unload your clothes immediately after the cotton, synthetics, woolen and delicate fabrics program, you may use the rinse hold function in order to prevent your clothes become wrinkled in an anhydrous condition. With this function, your laundry is kept in the final rinsing water. If you want to spin your laundry after the rinse hold function: - Adjust the spin speed. - Press Start/Pause/Cancel Button. Program resumes. Your machines drains the water and spins your laundry. You can use no spin function in order to drain the water without spinning at the end of the program. e Program and consumption table • : Selectable * : Automatically selected, not cancellable. **: Energy Label programme (EN 60456) Water and power consumption and programme duration may differ from the table shown, subject to changes in water pressure, water hardness and temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions, and fluctuations in the supply voltage. Programme ( Max. Load (kg Programme Duration (~min) Water Consumption (l) Energy Consumption (kWh) Spin speed (rpm) Auxiliaryfunctions Temperature 1500-1600 rpm 1400 rpm (For A class spin efficiency) Spin speed (rpm) 600-1400 Prewash Quick Wash Rinse Plus Anti-Creasing Rinse Hold 90 80 70 60 50 40 30 Cold Cottons 90 7 162 153 49 2.72 max. • • • • • • • • • • • • • Cottons **60 7 145. 148. 136. 139. 49 1,19. 1,33. max. • • • • • • • • • • • • • Cottons 40 7 133 124 49 0.72 max. • • • • • • • • • • • • • Super 40 7 168 159 49 0.84 max. • • Intensive 60 7 198 189 70 1.43 max. * • • • • • Babycare 90 7 148 139 70 2.4 max. * • • • • • • • Synthetics 60 3 128 128 59 1 800 • • • • • • • • • • Synthetics 40 3 93 93 59 0.79 800 • • • • • • • • • • Delicate 40 2 75 75 65 0.3 600 • • • • • • Woollens 40 1.5 67 67 59 0.44 600 • • • • • Hand wash 30 1 49 49 40 0.25 600 • • Mini 30 2.5 30 30 55 0.22 max. *** • • 1) For D1 7101 E, D1 7102 E, D1 7102 ES, D1 7101 EM models 2) For D1 7081 E, D1 7082 E models Auxiliary functions Auxiliary Function Selection Keys • Depending on the program, you can select the desired auxiliary function by pressing the keys 11a, 11b, 11c, 11d. • Select the required auxiliary functions before starting the program. • Some combinations cannot be selected together. (Ex.: Prewash (Figure 2-11a) and Quick Wash (Figure 2-11b). • Symbol of the selected auxiliary function (Figure 3-13l) will light up. Auxiliary function selection If an auxiliary function that should not be selected together with a previously selected function is chosen, the first selected function will be cancelled and the last auxiliary function selection will remain active. (Ex.: If you want to select prewash first and then quick wash, prewash will be cancelled and quick wash will remain active. Auxiliary function that is not compatible with the program cannot be selected. (see, “Program Selection Table”) Prewash When you select this function (11a), the display will indicate “1” symbol. • A prewash is only...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :