Évaluations - 3, GPA: 4.3
(
)
)
|
Facilité d'utilisation
5 Take the laundry out when the spinning ends. When the spinning ends, open the top lid and the interior lid. Then take out the depression cover and laundry after the spinning drum has stopped rotation completely. Note: Refer to the Notes on Spinning carefully. If you need water-added rinsing-spinning , please check the connection between the water hose and filling inlet. Install the water inlet hose Water inlet entrance Water inlet hoseThe water hose should be connected as shown in the right figure. Notes on Spinning Use the foam-removing spinning to remove the extra detergent liquid. It can both shorten the washing time and save the water consumption. Please put in the gland properly even if the laundries .Do not leave any articles above the depression cover. Push Gland Push Proper The laundries are slanting Proper No gland quantity is small. Disposal after spinning 1 Hang up the drain hose. 2 Pull off the power plug and hang up the power cord. 3 Wipe the complete unit with soft cloth twisted dry. 4 Open the inner/outer cover of the spin tub for some time (about one hour), then close them. Maintenance 1 Wipe off the water drops on the surface and inside the tub with clean soft cloth. 2 Be sure to pull off the power plug before maintenance. If the cabinet is dirty, wipe it with wet soft cloth Do not wash it directly by water. Wipe with neutral detergent if too dirty Do not wipe with thinner, petrol, alcohol, etc. Thinner Alcohol Petrol Trouble-shooting Answer to question (If there's breakdown, please pull off the power plug before checking) The followingphenomena are not breakdowns sometimes. Please confirm again before sendingit to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself. Phenomena The reason-How to solve The machine does not act. There's abnormal sound and violent vibration during spinning Is there power failure--Please use it when there's power supply. Is the power plug loose--Insert the power plug tightly. Is the machine slanting--Adjust the machine to be even Is the gland pressed evenly--Put the gland in properlyCheck if the laundry is inclined to one side--Take it out and replace it evenly. Check if there are any metal articles in the laundry. -- take them out. Check if it is too full with the laundry-- load the laundry only in the right amount. Check if there are any articles out of the spinning drum -- put them into the drum. ...
Ce manuel est également adapté pour les modèles :Séchoirs - HWS60-40 (1.39 mb)
Séchoirs - HWS60-40 (1.39 mb)
Séchoirs - HWS60-50 (1.39 mb)
Séchoirs - HWS60-40 (1.39 mb)