Évaluations - , GPA: ( )

Instructions Haier, Modèle HDE5300AW

Fabricant : Haier
Taille : 3.01 mb
Nom Fichier :

Langue d'enseignement:

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

The grounding terminal should not be connected to gas or tap water pipelines. • Make sure exhaust duct has been properly connected. • Make sure lint filter is clean and properly installed. If lint filter is not in place, tumbling items could enter the exhaust system and cause damage to the dryer. NOTE: Appl ies to Auto Dry cycle and Timed Dry cycle. • For Rack Dry cycle, remove the lint filter and assemble the drying rack with its rear end slightly downward inclined. The configuration is as shown on page 26. 25 English LOAD CLOTHES INTO DRYER • The appropriate load should be 1/3 ~ 1/2 of the drum volume. The drum capaicity is 7.5 Cubic Foot. Avoid too much load, as space is needed to allow clothes free rotation for uniform and wrinkle-proof drying. • When drying big articles, only 2-3 pieces should be loaded at a time and supplemented with small and medium-sized articles. • For delicate clothes or less load, two towels may be added to get better drying and wrinkle-proof effects. • Do not excessively dry clothes to avoid wrinkles, shrinkage, roughness, electro-static charge accumulation, and/or more lint. Rack Dry cycle • This program is designed specially for articles like sport shoes. During drying, please make sure the articles are placed on the rack with no risk of entangling the baffles while the drum is rotating. NOTE: I f drying rack is not in place, rolling inner tub could collide with drying rack and causes damage to the dryer and drying rack. Using the Dryer Rack 1. Open the dryer door. 2. Check that the drum is empty. 3. Remove the lint filter. (Fig 1) 4. Lift the dryer rack horizontally into the drum.(Fig.2) Fig.2 Fig.3 5. Place the dryer rack so that the catches are inserted at the front and locked in place.(Fig.3) Fig.4 6. Insert the lint filter, must be inserted flush with the drum edge.(Fig.4) 26 English AUTO DRY CYCLE HDE/HDG5300AW, CHDE5300AW 1. Touch the Power On/Off pad • The computer board will beep once and the dryer will change from off status to the initial operating status (NORMAL program). • If the "Start/Pause" pad is not touched in 5 min after powering on, it automatically cuts off power and returns to off status. • The dryer returns to off status immediately upon end of each cycle. Regardless, the status of the control panel, touching OFF will stop all operations. • The default status is "NORMAL" program. 0 ■ —i * * + * / 4 4 ► * luk [■I«l 1 2. Touch "Auto-Dry Cycles" pad to select a suitable full automatic cycle. • The NORMAL program will be automatically selected after powering on. If another full automatic program is desired, touch "Auto-Dry Cycles" pad until corresponding indicator turns on. • To select your desired settings, the "Custom Program" function should be chosen. • The dryer can memorize programs defined by user and display the previous program upon next application of this function. 3. Touch "Dry Level" pad to select a suitable drying level. 4. Touch "Temperature"...