Log:
Évaluations - 2, GPA: 4 ( )

Instructions Haier, Modèle CHLF103Q

Fabricant : Haier
Taille : 285.6 kb
Nom Fichier :
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


Note: If drying rack is not in place, rolling inner tub could collide with drying rack and causes damage to the dryer and drying rack. AUTO DRY CYCLE 1.Press any button except "Off" button to power on. • Turn on the power switch, the computer board beeps once and the dryer transfers from off status to the initial operating status (Normal program). • If no "Start/Pause" button is pressed in 5 min after powering on, it automatically cuts off power and returns to off status. • It returns to off status immediately upon end of a cycle; Whatever status the computer board is (start, pause, alarm etc.). Pressing "Off" button will stop all operations and it enters off status. • Various button initial status for "Normal program". 16 English Cycle Signal Softer Wrinkle Care Off Cycles Normal LED display Indicate current program remaining time Temp High Sensor Dry Level More Dry Timed/Cycles Auto-program 2. Press "Auto-Dry Cycles" button to select a suitable full automatic cycle. • The Normal program will be automatically selected after powering on. If another full automatic program is desired, press "Auto-Dry Cycles" button until corresponding indicator turns on. Casual Delicate Touch Up Custom Normal Heavy Cotton Bulky Items Auto-Dry Cycles • To select your desired settings the "Custom" function should be chosen. • It can memorize programs defined by user and display the previous program upon next application of this function. Use details are as follows: After powering on, press "Auto-Dry Cycles" until"Custom" status, then set "Timed-Dry Cycles" to Timed Dry or Rack Dry, and set status of other buttons. Press "Start/Pause" button or after half a minute, the program defined by user himself will be stored and will be directly displayed upon next use. Notes: Pressing "Sensor Dry Level" button will be inactive during use of "Custom" function. 3. Press "Sensor Dry Level" button to select a suitable drying time. • After powering on, the clothes dryer automatically sets dryness at "very", which means a longer drying time. If other drying time is desired, press "Sensor Dry Level" button to select a shorter time. 17 Francais 4. Press "Temp" button to set a suitable drying temperature. • After switching on, the dryer sets corresponding temperature adapting to different program selected. If other drying temperature is wanted, press "Temp" button to enable such a selection. 5. Press "Signal" button, a buzzer will sound upon end of a cycle. • After switching on, the dryer automatically sets buzzer at "Softer", while the user may define three prompt sound conditions "Louder", "Softer" and "Off". 6. Press "Wrinkle Saver"button to select a suitable reserved drying program. • After powering on, the dryer delay start drying program automatically sets as disabled. When you desire a drying cycle after a delay time, press "Wrinkle Saver" button to set wrinkle saver drying program. After initial pressing, the LED display indicates 3 hrs, which will be increased until 24 hrs by ...

Ce manuel est également adapté pour les modèles :
Séchoirs - CGDE700AW (285.6 kb)
Séchoirs - CGDE700AW (285.6 kb)
Séchoirs - CGDE700AW (285.6 kb)
Séchoirs - CGDE700AW (285.6 kb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories