Log:
Évaluations - 1, GPA: 3 ( )

Instructions Alliance Laundry Systems, Modèle CHLF103Q

Fabricant : Alliance Laundry Systems
Taille : 285.6 kb
Nom Fichier :
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


Pressing again will resume operation. 18 Francais TIMED DRY CYCLE 1. Press any button except "Off" button to power on. 2. Press "Timed-Dry Cycles" button and select "Timed Dry" cycle. • After powering on, press "Timed-Dry Cycle" button to select "Timed Dry" program. 3. Press "More Time" And "Less Time" buttons to set a suitable time. • After setting "Timed-Dry Cycle" to "Timed Dry" , you can press these two uttons to increase or decrease drying time as you desires. 4-6.Press buttons "Temp", "Cycle Signal", "Wrinkle saver", and "Touch Up" to define your desired program. Notes: For "Timed Dry" program, use of buttons "Temp", "Cycle Signal", "Wrinkle Saver" and "Touch Up" is the same as for auto-programs. "Sensor Dryness Level" is inactive, pressing of which will get alarms. 7. Press "Start/Pause" button. 19 Francais RACK DRY CYCLE 1. Press any button except "Off" button to power on. 2. Press "Timed-Dry Cycles" button and select "Rack Dry" cycle. • After powering on, press "Timed-Dry Cycle" button to select "Rack Dry" program. 3. Press "More Time" And "Less Time" buttons to set a suitable time. • After setting "Timed-Dry Cycle" to "Rack Dry", you can press these two buttons to increase or decrease drying time as you desire. 4-7.Press buttons "Temp", "Signal", "Wrinkle saver", and "Touch Up" to define your desired program. Notes: For "Rack Dry" program, use of buttons "Temp", "Signal", "wrinkle Saver" and "Touch up" is the same as for auto-programs. "Sensor Dry Level" is here inactive, pressing of which will get alarms. 8. Press "Start/Pause" button. Other Features Your dryer also has the following features for your convenience: Lint Filter: • All dryers come with a lint filter that needs to be cleaned before or after every use (read “Care and Cleaning Guide” Section). Leveling Legs: • Your dryer has four leveling legs which are located in the front and rear corners of your dryer. After installing your dryer in its final position, you can level your dryer. • Leveling legs can be adjusted by turning them clockwise to raise your dryer or by turning them counterclockwise to lower your dryer. 20 NORMAL OPERATING SOUNDS The following sounds are normal during the operation of the dryer. • Tumbling sound: this is normal as the heavy wet clothes in the dryer are continuously being tossed around. • Air rushing noise: this happens as the dryer drum spins at very high RPM and the air is rushing through the dryer drum. Tips • For best drying results, clean the lint filter before and after every use. • Do not overload the dryer. • Balance the dryer load, evenly throughout the dryer for the best result. • Drying time depends on many variables: load size,type of fabric, and moisture in it, heat and moisture in the room, electric voltage, length of the exhaust duct, etc. • To eliminate guessing and conserve energy,we recommend for certain clothes to choose an auto drying setting. • Always follow the fabric care instructions supplied by the garment manufacturer. CARE...

Ce manuel est également adapté pour les modèles :
Séchoirs - CGDE700AW (285.6 kb)
Séchoirs - CGDE700AW (285.6 kb)
Séchoirs - CGDE700AW (285.6 kb)
Séchoirs - CGDE700AW (285.6 kb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories