Évaluations - 4, GPA: 4
(
)
)
|
Facilité d'utilisation
Channel If the input is an antenna (ANT 1, ANT 2), enter a channel number in any of three ways: • Enter the number using the remote control’s number keys. • Press repeatedly • Press and hold to scroll quickly through the available channel numbers. 5. TV Menus Setup Menu, continued Setup menu, Energy options Setup Menu Options Energy Energy Fast Power On Use the Energy Mode option to select the level of power consumption Mode while the TV is turned off. The default setting is Fast Power On. Low Power Low Power uses less energy, but TV power-on takes longer and some TV features may be unavailable. Keep Energy Mode set to Fast Power On if you need to: • Have faster power on. • Receive updates to ChannelView channel listings. • Keep the TV Clock accurate for the TV Timer. With the Low Power setting, you must reset the TV Clock if the TV is left turned off for over 48 hours. Lamp Standard Standard is for most viewing conditions and may extend lamp life by Mode using lower wattage. Use Bright in brightly lit rooms. Bright 3D On, Off Use the On setting for video games and movies that require 3-D glasses. Mode 3D Mode Glasses Standard, Synchronizes the 3D glasses with the image on screen to provide the best L-R Reverse 3D effect. Standard is the default; try Reverse if this seems incorrect. Note: 3D options are available only for 1080p 60 Hz video sources connected to an HDMI input. 5. TV Menus Inputs Menu Note: When you change an input name in the Name menu and then exit the Name menu: The name is changed The icon in the Input Selection menu is changed Audio and video settings are changed to the defaults for the new device type. All previous NetCommand “learning” for the input is erased. Inputs Menu Options Name Cable Box, Camcorder, CD/ • Lets you assign or change names of inputs appearing in Audio, DVD (DVD, DVD2, Blu-Ray, the Input Selection menu. HD DVD), DVR, Game (Game, • Lets you turn Ant-1 and Ant-2 On/Off (to display/hide in Input PS, Xbox, Wii), MP3 Player, PC, Selection menu). Satellite, VCR, AVR • Lets you turn unused HDMI inputs Off (to remove from Input Selection menu). On/Off (ANT 1 and ANT 2 only) • Press to move between inputs. Off (HDMI only) • Press to select a name. • If you change the name of an input after performing Control Enable, Control Disable NetCommand “learning,” the IR codes you “learned” are (CEC-enabled devices only) erased. Notes for HDMI devices • Disconnecting an HDMI device: When you disconnect an HDMI device, the icon remains in the Input Selection menu until you remove it. To remove an unwanted HDMI icon, select Off for the HDMI input. • Disabling TV’s use of CEC: CEC-enabled devices appear in the Inputs > Name menu with an option to turn off the TV’s CEC signals to the device. You may want to disable the TV’s CEC signals if control conflicts occur. The default setting is Control Enable. Press to highlight Control Disable to turn off TV CEC for the device. To enable or disable the device’s response to CEC signals, see the device’s owner’s manual. • Names of CEC-enabled devices: CEC-enabled devices send their own predefined name to the TV. You cannot change the name of CEC-enabled devices. Order Lets you put frequently used icons at the start of the Input Selection menu. Press 1. to highlight the icon to move. Press 2. ENTER to confirm the selection. Press 3. to drag the icon to the desired position. Press 4. ENTER to set the new position. Learn 736 and 835 series models Select • Learn to perform initial set-up of NetCommand control of the current viewing device. Lets you add or remove individual keys from NetCommand control of a device. • See detailed instructions in chapter 6, “NetCommand IR Control.” AV Receiver 736 and 835 series models Sets up NetCommand control of an A/V receiver. This set-up allows you to: Operate the A/V receiver’s power and volume functions with the TV’s remote control. • Automatically switch an A/V receiver to the correct audio input when a device is selected in • the Input Selection menu. Automatically switch an A/V receiver with an HDMI output to the correct audio and video inputs • when a device is selected in the Input Selection menu. See detailed instructions in chapter 6, “NetCommand IR Control,” starting on page 57. Change input names using the Inputs > Name menu. 5. TV Menus Lock Menu TV locks available from the Lock menu are: Lock by Ratings Parent Restricts access to programming based on V-Chip rating signals sent by the broadcaster. Other Lock by Time Time Restricts TV use by time of day. Lock Control Panel Control Panel Disables the buttons on the TV’s control panel. Use this option if small children in the home try to press control-panel buttons. Note: Channel Lock is an additional lock that blocks access to specific channels. Channel Lock is available under the Setup menu (Setup > Edit > Lock, page 43). Pass Codes Setting a Pass Code You are prompted to enter a pass code whenever you select Lock on the Main menu. To set a pass code for ...
Ce manuel est également adapté pour les modèles :TV - WD-60735 (2.67 mb)
TV - WD-60735 (2.67 mb)
TV - WD-65735 (2.67 mb)
TV - WD-65736 (2.67 mb)