Évaluations - 2, GPA: 4
(
)
)
|
Facilité d'utilisation
Avoid excessive moisture. Specifications Power Source CT-13R4 CT-20G24 CT-13R30 CT-20G34 CT-13R40 CT-20R16 CT-20G4 CT-2013S CT-20G14 CT-Z1427Z CT-Z2147Z CT-Z2127Z 120V AC, 60Hz Auto {HOVca- 220Vca); 50/60Hz Channel Capability -181 VHF-12; UHF-56; Cable-113 Video Input Jacks {some models) 75 Am, Phono Jack Type Audio Input Jacks (some models) 500mv RMS 47K Ohm To Audio AMP Jack (some models) 0-2.OV RMS 4.7K Ohm Television Location This unit is intended to be used with an optional stand or entertainment center. Consult your dealer for available options. □ Avoid excessive sunlight or bright lights, including reflections. □ Keep away from excessive heat or moisture. Inadequate ventilation may cause internal component failure. 0 Fluorescent lighting rnay reduce Remote Control transmitting range. □ Avoid magnetic equipment, including motors, fans, or external speakers. Optional Cable Connections Shielded audio and video cables should be used between components. For best results: • Use 75-ohm coaxial shielded cables. • Use appropriate input and output connectors that match your component connectors. • Avoid long cables to minimize interference. AC Power Supply Cord CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH gflrBgj WIDE BLADE OF PLUG TO WIDE SLOT OF AC OUTLET AND FULLY INSERT. DO NOT USE A PLUG WITH A RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. FOR SOME MODELS THAT ARE NON-POLARIZED, THE USE OF AN AC ADAPTOR CONNECTOR MAY BE NECESSARY. Batteries • Replace batteries in pairs. • Do not mix battery types (zinc carbon with alkaline). • Do not recharge, short-circuit, disassemble, heat, or burn used batteries. Cable/Antenna For proper reception, either a cable or antenna connection are required. Cable Connection Connect the cable supplied by your local cable company. Incoming Cable from Cable Company 75 Ohms VHF/UHF on back of TV Polarized plug til: Non-Polarized plug Note: or obligation. A cable converter box may be required for proper reception. Check with your local Cable company for compatibility requirements. Antenna Connection • For proper reception of VHF/UHF channels, an external antenna is required. For best reception an outdoor antenna is recommended. Antenna Mode must be set to TV. VHF/UHF Antenna A VHF/UHF antenna and transformer are supplied in some models. Attach to the TV, adjust the antenna until the picture is clear. (See Antenna Connection). Incoming Cable from Home Antenna Helpful Hints: Cable Preset Cable Mode is preset at the factory. Antenna users must change to Antenna Mode in the Set Up Menu. Optional Equipment Connections VCR’s, video disc players, TV game consoles, and DSS equipment can also be connected to the antenna input connection. (See your equipment manual). Procedure 1. Connect equipment as shown to front or rear Audio/Video input jacks. Note: Front and rear Audio/Video connections cannot be operated at the same time. 2. Select th...
Ce manuel est également adapté pour les modèles :TV - CT13R4 (670.04 kb)
TV - CT13R30 (670.04 kb)
TV - CT20G4 (670.04 kb)
TV - CT20G14 (670.04 kb)