Log:
Évaluations - 2, GPA: 4 ( )

Instructions Panasonic, Modèle CT36G33

Fabricant : Panasonic
Taille : 1.11 mb
Nom Fichier :
Langue d'enseignement: enes
Aller à la télécharger



Facilité d'utilisation


......14 1 Congratulations Congratulations Your new TV features a solid state chassis that is designed to give you many years of enjoyment. It was thoroughly tested and tuned at the factory for best performance. Customer Record The model and serial number of this product are located on the back of the TV. You should note the model and serial number in the space provided and retain as a permanent record of your purchase. This will aid in identification in the event of theft or loss. Product registration is available at Model Number . Serial Number Care and Cleaning Screen (Turn TV Off) • Use a mild soap solution or window cleaner with a soft clean cloth. DO NOT USE ABRASIVE CLEANERS. • Avoid excessive moisture and wipe dry. Cabinet and Remote Control . □ For plastic cabinets and Remote Control, use a soft cloth dampened with water or a mild detergent solution. Avoid excessive moisture and wipe dry. □ For wooden cabinets, use a soft cloth and an occasional coat of furniture polish.to preserve the finish. □ Do not use benzene, thinner or other petroleum based products. Specifications Power Source CT-27G33 CT-32G33 CT-36G33 120V AC, 60Hz • VHF-12; UHF-56; Cable-113'J^- 2 Video Input Jacks 1 Vp-p, 75 Ohm, Phono Jack Type 2 Audio Input Jacks 500mV RMS 47K Ohm To Audio AMP Jack ■ 0-2.OV RMS 4.7K Ohm- . , Specifications are subject to change without notice or obligation. 2 Installation Installation Television Location This unit is intended to be used with an optional stand or entertainment center. Consult your dealer for available options. □ Avoid excessive sunlight or bright lights, including reflections. □ Keep away from excessive heat or moisture. Inadequate ventilation may cause internal component failure. □ Fluorescent lighting may reduce Remote Control transmitting range. □ Avoid magnetic equipment, including motors, fans, or external speakers. Optional Cable Connections Shielded audio and video cables should be used between components. For best results: □ Use 75-ohm coaxial shielded cables. □ Check type of output and input connectors on your components. □ Determine required cable lengths. AC Power Supply Cord CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF AC OUTLET AND FULLY INSERT. DO NOT USE A PLUG WITH A RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. FOR SOME MODELS THAT ARE NON-POLAR1ZED, THE USE OF AN AC ADAPTOR CONNECTOR MAY BE NECESSARY. r Polarized plug Cable / Antenna For proper reception, either a cable or antenna connection is required. Cable Connection Connect the cable supplied by your local cable company. Note: A cable converter box may be required for proper reception. Check with your local Cable company for compatibility requirements. Antenna Connection Incoming Cable from Cabte Company 75 Ohm VHF/UHF on back ol TV For proper reception of VHF/UHF channels, an external antenna is required. For best reception an outdoor antenna is recommended. Antenna Mode must be set to TV in the SET UP menu. incoming cable from Home Antenna v1 v • ” ~ Cable Preset Gable Mode is preset at the factory. Antenna users must change to Antenna Mode in the Set Up Menu. 3 Installation_ Optional Equipment Connections VCR’s, video disc players, video game consoles, and DSS equipment can also be connected to the video inputs. See the optional equipment manual for details. TERMINALS ON BACK OF TV VCR Procedure 1. Connect equipment as shown to rear Audio/Video input jacks. • 2. Select the Video mode by pressing TV/VIDEO button. 3. Operate optional equipment as instructed in equipment manual. Note: The S-VIDEO connection is optional and overrides other VIDEO connection. Use INPUT 1, AUDIO R and L with S-VIDEO connection. TO AUDIO AMPIifier Connect to an external audio amplifier input for listening to a stereo system. . Note: TO AUDIO AMP terminals cannot be connected directly to external speakers. Audio Adjustments 1. Select TV SPEAKERS ON located in the AUDIO menu on screen. 2. Set amplifier volume to minimum. 3.' Adjust TV volume to desired level. 4. Adjust amplifier volume to match the TV. 5. Select TV SPEAKERS OFF&VAO from AUDIO menu. 6. Volume, mute, bass, treble and balance are now controlled from the TV. . Note: In OFF&FAO the volume is controlled by the external amplifier. _ • ■__ Picture In Picture (PIP) Operation Picture In Picture (PIP) Operation With / Without A VCR And Cable Box This television includes a.two tuner Picture In Picture (PIP) feature. This allows watching two (2) live broadcasts at the same time without or with an external video source (VCR). Without A VCR (External Video Source) Procedure • Connect incoming cable to antenna (ANT) input on back of TV. • Press the PIP button on the Remote Control to display the PIP frame. Note: . The audio is for the Main Picture, only. • Choose channels for the PIP frame by pre...

Ce manuel est également adapté pour les modèles :
TV - CT27G33 (1.11 mb)
TV - CT32G33 (1.11 mb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories