Évaluations - 2, GPA: 3.5
(
)
)
|
Photos et spécifications Sony KDL-26T3000 |
Facilité d'utilisation
If a message appears for you to confirm the aerial connection No digital or analogue channels were found. Check all the aerial/cable connection and press to start auto-tuning again. 4 When the Programme Sorting appears on the screen, follow “Programme Sorting” (27). If you do not change the order in which the analogue channels are step 5. 5 Press MENU to exit. The TV has now tuned in all the available channels. ~ When a digital broadcast channel cannot be received, or when selecting a region in which there are no digital broadcasts in step 4 (page 7), the time must be set after performing step 5. To tune the TV for Cable connection 1 press . 2 Press F/f to select “Quick Scan” or “Full Scan”, then press . "Quick Scan" : channels are tuned according to the cable operator information within the broadcast signal. Recommended setting for "Frequency", "Network ID" and "Symbol Rate" is "Auto" . This option is recommended for fast tuning when supported by your cable operator. If the "Quick Scan" does not tune, please use the "Full Scan" method below. "Full Scan" : All available channels are tuned and stored. This procedure may take some time. This option is recommended when "Quick Scan" is not supported by your cable provider. For further information about supported cable providers, refer to support web site: 3 Press G/g/f to select “Start”. The TV starts searching for channels. Do not press any buttons on the TV or remote. ~ Some cable providers do not support “Quick Scan”. If no channels are detected using “Quick Scan”, perform “Full Scan”. Detaching the Table-Top Stand from the TV Do not remove the Table-Top Stand for any reason other than to wall-mount the TV. ~ Refer to the instructions for SU-WL100 Wall Mount Bracket. It is possible the model name KDL-will not appear on the Start-up Guide 7 GB Safety information Installation/Set-up Install and use the TV set in accordance with the instructions below in order to avoid any risk of fire, electrical shock or damage and/or injuries. Installation • The TV set should be installed near an easily accessible mains socket. • Place the TV set on a stable, level surface. • Only qualified service personnel should carry out wall installations. • For safety reasons, it is strongly recommended that you use Sony accessories, including: – Wall-mount bracket SU-WL100 Transporting • Before transporting the TV set, disconnect all cables. • When transporting the TV set by hand, hold it as shown on the right. • When lifting or moving the TV set, hold it firmly from the bottom. Do not put stress on the LCD panel. • When transporting the TV set, do not subject it to jolts or excessive vibration. • When transporting the TV set for repairs or when moving, pack it using the original carton and packing material. Ventilation • Never cover the ventilation holes or insert anything in the cabinet. • Leave space around the TV set as shown below. • It is strongly recommended that you use a Sony wall-mount bracket in order to provide adequate air-circulation. Installed on the wall 30 cm 10 cm 10 cm 10 cm Leave at least this space around the set. Installed with stand 30 cm 10 cm10 cm 6 cm Leave at least this space around the set. • To ensure proper ventilation and prevent the collection of dirt or dust: – Do not lay the TV set flat, install upside down, backwards, or sideways. – Do not place the TV set on a shelf, rug, bed or in a closet. – Do not cover the TV set with a cloth, such as curtains, or items such as newspapers, etc. – Do not install the TV set as shown below. Air circulation Air circulation is blocked. is blocked. Wall Wall Mains lead Handle the mains lead and socket as follows in order to avoid any risk of fire, electrical shock or damage and/or injuries: – Use only Sony mains leads, not those of other brands. – Insert the plug fully into the mains socket. – Operate the TV set on a 220-240 V AC supply only. – When wiring cables, be sure to unplug the mains lead for your safety and care not to catch your feet on the cables. – Disconnect the mains lead from the mains socket before working on or moving the TV set. – Keep the mains lead away from heat sources. – Unplug the mains plug and clean it regularly. If the plug is covered with dust and it picks up moisture, its insulation may deteriorate, which could result in a fire. Notes • Do not use the supplied mains lead on any equipment. • Do not pinch, bend, or twist the mains The core conductors may be exposed • Do not modify the mains lead. • Do not put anything heavy on the mains lead. • Do not pull on the mains lead the mains lead. 8 GB • Do not connect too many appliances to the same mains socket. • Do not use a poor fitting mains socket. Prohibited Usage Do not install/use the TV set in locations, environments or situations such as those listed below, or the TV set may malfunction and cause a fire, electrical shock, damage and/or injuries. Location: Outdoors (in direct sunlight), at the seasho...