Évaluations - 3, GPA: 4.3
(
)
)
|
Photos et spécifications Sony KDL-40D3500 |
Facilité d'utilisation
Reset Resets all the “Sound” settings except “Target Inputs”, “Sound Mode”, “Dual Sound”, “i Speaker Link” and “i Dual Sound” to the factory settings. Treble Adjusts higher-pitched sounds. Bass Adjusts lower-pitched sounds. Balance Emphasizes left or right speaker balance. Auto Volume Keeps a constant volume level even when volume level gaps occur (e.g. adverts tend to be louder than programmes). Volume Offset Adjusts the volume level of the current input relative to other inputs, when “Target Inputs” is set to “Viewing Only”. Surround “S-FORCE Front Surround”: Available for normal stereo broadcast and 5.1ch digital broadcast surround audio, and the audio input from connected equipment. “Off”: Converts and reproduces 5.1ch and other digital broadcast surround audio as normal stereo audio (2ch). Reproduces the original audio of other broadcasts as is. Sound Booster Gives sound more impact by compensating for phase effects in speakers. Continued 25 GB Using MENU Functions Dual Sound Selects the sound from the speaker for a stereo or bilingual broadcast. “Stereo”/“Mono”: For a stereo broadcast. “A”/“B”/“Mono”: For a bilingual broadcast, select “A” for sound channel 1, “B” for sound channel 2, or “Mono” for a mono channel, if available. ~ If you select other equipment connected to the TV, set “Dual Sound” to “Stereo”, “A” or “B”. However, when the external equipment connected to the HDMI socket is selected, this is fixed to “Stereo”. i Speaker Link Switches the TV’s internal speakers on/off when headphones are connected. “On”: Sound is output only from headphones. “Off”: Sound is output from both the TV and headphones. i Dual Sound Selects the sound from the headphone for a stereo or bilingual broadcast, which depends on the “Dual Sound” selection. 26 GB Screen menu You can select the options listed below on the “Screen” menu. To select options in “Settings”, refer to “Navigating through menus” (page 22). Target Inputs Selects whether to apply settings made in the “Screen” menu to all inputs, or only to the input currently being watched. “All”: Applies settings to all inputs. “Viewing Only”: Applies settings only to the current input. Screen Format For details about the screen format, see “To change the screen format manually to suit the broadcast” on page 14. Auto Format Automatically changes the screen format according to the broadcast signal. To keep your setting, select “Off”. z Even if “Auto Format” is set to “On” or “Off”, you can always modify the format of the screen by pressing repeatedly. 4:3 Default Selects the default screen format for use with 4:3 broadcasts. “Smart”: Displays conventional 4:3 broadcasts with an imitation wide screen effect. “4:3”: Displays conventional 4:3 broadcasts in the correct proportions. “Off”: Keeps the current “Screen Format” setting when the channel or input is changed. Display Area Adjusts the screen area for displaying the picture. “Full Pixel”: Displays the picture for 1080i or 1080p (except for component input) sources in the original size when parts of the picture are cut off. “Normal”: Displays the recommended picture area. “-1”/“-2”: Enlarges the picture to hide the edge of the picture. ~ “Full Pixel” is available only when “Screen Format” is set to “Wide”. Horizontal Shift Adjusts the horizontal position of the picture. Vertical Shift Adjusts the vertical position of the picture when “Screen Format” is set to “Smart” (50 Hz), “Zoom” or “14:9”. Vertical Size Adjusts the vertical size of the picture when “Screen Format” is set to “Smart”, “Zoom” or “14:9”. 27 GB Using MENU Functions Set-up menu You can select the options listed below on the “Setup” menu. To select options in “Settings”, refer to “Navigating through menus” (page 22). Auto Start-up Starts the initial set-up to select the language and country/region, and tune in all available digital and analogue channels. Usually, you do not need to do this operation because the language and country/ region will have been selected and channels already tuned when the TV was first installed (page 6). However, this option allows you to repeat the process (e.g. to retune the TV after moving house, or to search for new channels that have been launched by broadcasters). Language Selects the language in which the menus are displayed. Film Mode Provides smoother picture movement when playing DVD or VCR images taken on film, reducing picture blur and graininess. “Auto 1”: Provides smoother picture movement than the original film-based content. Use this setting for standard use. “Auto 2”: Provides the original film-based content as is. “Off”: Turns off the “Film Mode” feature. ~ If the image contains irregular signals or too much noise, “Film Mode” will be automatically turned off even if “Auto 1” or “Auto 2” is selected. Video/Photo Provides suitable image quality by selecting the option depending on the input source (video or photograph data). “Video-A”: Sets suitable image quality, depending on the input source, video data ...
Ce manuel est également adapté pour les modèles :TV - KDL-40D3550 (4.94 mb)
TV - KDL-46D3500 (4.94 mb)
TV - KDL-46D3550 (4.94 mb)