Évaluations - 1, GPA: 3 ( )

Fabricant : Sony Taille : 4.94 mb Nom Fichier : Langue d'enseignement:

Photos et spécifications   Sony  KDL-46D3500

When you set “Picture Mode” to “Cinema”, “Photo” or “Standard”, you can set/change these settings. “Reset”: Resets all the advanced settings to the factory settings. “Black Corrector”: Enhances black areas of the picture for stronger contrast. “Adv. Contrast Enhancer”: Automatically adjusts “Backlight” and “Contrast” to the most suitable settings judging from the brightness of the screen. This setting is especially effective for dark images scenes. It will increase the contrast distinction of the darker picture scenes. “Gamma”: Adjusts the balance between bright and dark areas of the picture. “Clear White”: Emphasizes white colours. “Live Colour”: Makes colours more vivid. “Colour Space”: Changes the colour reproduction gamut. “Wide” reproduces the vivid colour and “Standard” reproduces the standard colour. 24 GB Sound menu You can select the options listed below on the “Sound” menu. To select options in “Settings”, refer to “Navigating through menus” (page 22). Target Inputs Selects whether to apply settings made in the “Sound” menu to all inputs, or only to the input currently being watched. “All”: Applies settings to all inputs. “Viewing Only”: Applies settings only to the current input. Sound Mode “Dynamic”: Enhances treble and bass. “Standard”: For standard sound. Recommended for home entertainment. “Custom”: Flat response. Also allows you to store your preferred settings. Reset Resets all the “Sound” settings except “Target Inputs”, “Sound Mode”, “Dual Sound”, “i Speaker Link” and “i Dual Sound” to the factory settings. Treble Adjusts higher-pitched sounds. Bass Adjusts lower-pitched sounds. Balance Emphasizes left or right speaker balance. Auto Volume Keeps a constant volume level even when volume level gaps occur (e.g. adverts tend to be louder than programmes). Volume Offset Adjusts the volume level of the current input relative to other inputs, when “Target Inputs” is set to “Viewing Only”. Surround “S-FORCE Front Surround”: Available for normal stereo broadcast and 5.1ch digital broadcast surround audio, and the audio input from connected equipment. “Off”: Converts and reproduces 5.1ch and other digital broadcast surround audio as normal stereo audio (2ch). Reproduces the original audio of other broadcasts as is. Sound Booster Gives sound more impact by compensating for phase effects in speakers. Continued 25 GB Using MENU Functions Dual Sound Selects the sound from the speaker for a stereo or bilingual broadcast. “Stereo”/“Mono”: For a stereo broadcast. “A”/“B”/“Mono”: For a bilingual broadcast, select “A” for sound channel 1, “B” for sound channel 2, or “Mono” for a mono channel, if available. ~ If you select other equipment connected to the TV, set “Dual Sound” to “Stereo”, “A” or “B”. However, when the external equipment connected to the HDMI socket is selected, this is fixed to “Stereo”. i Speaker Link Switches the TV’s internal speakers on/off when headphones are connected. “On”: Sound is output only from headphones. “Off”: Sound is output from both the TV and headphones. i Dual Sound Selects the sound from the headphone for a stereo or bilingual broadcast, which depends on the “Dual Sound” selection. 26 GB Screen menu You can select the options listed below on the “Screen” menu. To select options in “Settings”, refer to “Navigating through menus” (page 22). Target Inputs Selects whether to apply settings made in the “Screen” menu to all inputs, or only to the input currently being watched. “All”: Applies settings to all inputs. “Viewing Only”: Applies settings only to the current input. Screen Format For details about the screen format, see “To change the screen format manually to suit the broadcast” on page 14. Auto Format Automatically changes the screen format according to the broadcast signal. To keep your setting, select “Off”. z Even if “Auto Format” is set to “On” or “Off”, you can always modify the format of the screen by pressing repeatedly. 4:3 Default Selects the default screen format for use with 4:3 broadcasts. “Smart”: Displays conventional 4:3 broadcasts with an imitation wide screen effect. “4:3”: Displays conventional 4:3 broadcasts in the correct proportions. “Off”: Keeps the current “Screen Format” setting when the channel or input is changed. Display Area Adjusts the screen area for displaying the picture. “Full Pixel”: Displays the picture for 1080i or 1080p (except for component input) sources in the original size when parts of the picture are cut off. “Normal”: Displays the recommended picture area. “-1”/“-2”: Enlarges the picture to hide the edge of the picture. ~ “Full Pixel” is available only when “Screen Format” is set to “Wide”. Horizontal Shift Adjusts the horizontal position of the picture. Vertical Shift Adjusts the vertical position of the picture when “Screen Format” is set to “Smart” (50 Hz), “Zoom” or “14:9”. Vertical Size Adjusts the vertical size of the picture when “Screen Format” is set to “Smart”, “Zoom” or “14:9”. 27 GB Using MENU Functions Set-up m...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :