Évaluations - 2, GPA: 3 ( )

Fabricant : Toshiba Taille : 5.44 mb Nom Fichier : Langue d'enseignement:

To connect an HDMI device, you will need: • One HDMI cable (type A connector) per HDMI device . For proper operation, it is recommended that you use an HDMI cable with the HDMI Logo ( ). . To display a 1080p/60Hz signal format, you will need a Category 2 cable. Conventional HDMI/DVI cable may not work properly. . HDMI cable transfers both video and audio. Separate analog audio cables are not required (see illustration). . See “Setting the HDMI ® audio mode” (. page 26). HDMI device TV back panel HDMI cable To view the HDMI device video: Select the HDMI 1, HDMI 2 video input source on the TV.* To select the video input source, press on the * remote control (. page 21). To connect a DVI device, you will need: • One HDMI-to-DVI adapter cable . For proper operation, the length of an HDMIto- DVI adapter cable should not exceed 9.8 ft (3m). The recommended length is 6.6 ft (2m). • One 3.5mm stereo to RCA Y-cable . An HDMI-to-DVI adapter cable transfers video only. Separate analog audio cables are required (see illustration). . See “Setting the HDMI ® audio mode” (. page 26). TV back panel VIDEO AUDIO L R RL OUT IN DVI/HDCPOUTIN DVI device HDMI-to-DVI adapter cable Audio cable Note: To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures: • When turning on your electronic components, turn on the TV first, and then the HDMI or DVI device. • When turning off your electronic components, turn off the HDMI or DVI device first, and then the TV. [1] EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for reception of high-definition video signals. Because this is an evolving technology, it is possible that some devices may not operate properly with the TV. Chapter 2: Connecting your TV REGZA-LINK® connection You can control the basic functions of connected audio/video devices using the TV’s remote control if you connect a REGZA-LINK® compatible audio receiver or playback device. For an explanation of setup and operations, see page 46. Playback device (REGZA-LINK® DVD player, etc.) Playback device (REGZA-LINK® DVD player, etc.) Audio receiver TV back panel To connect an Audio Receiver and Playback Devices, you will need: • HDMI cables (. page 13) Note: • If several devices are connected, the REGZA-LINK feature may not operate properly. • For proper operation, it is recommended that you use HDMI cables with the HDMI Logo ( ). Before controlling the device(s): • After completing the above connections, set the REGZA-LINK Setup menu as you desire (. page 47). • The connected devices must also be set. For details, see the operation manual for each device. • The REGZA-LINK® feature uses the CEC technology as regulated by the HDMI standard. • This feature is limited to models incorporating Toshiba’s REGZA-LINK®. However, Toshiba is not liable for those operations. Refer to the individual instruction manuals for compatibility information. Note: This feature may not work properly depending on the devices that are connected. 18 Chapter 2: Connecting your TV Connecting a digital audio system The TV’s DIGITAL AUDIO OUT terminal outputs a Dolby® * Digital or 2-channel down-mixed PCM (Pulse-Code Modulation) signal for use with an external Dolby® Digital decoder or other external audio system with digital audio input. You will need: • Coaxial digital audio cable DIGITAL AUDIO IN Dolby Digital decoder or other digital audio system TV back panel To control the audio: 1. Turn on the TV and the digital audio device. 2. Press on the TV’s remote control and open the Sound menu. 3. Highlight Audio Setup and press . 4. In the Digital Output Format field, select either Dolby Digital or PCM, depending on your device (.“Selecting the digital audio output format” on page 38). Note: •• Some audio systems may not be compatible with Dolby Digital bitstream signals. Older audio systems that are not compatible with standard digital out signals may not work properly, creating a high noise level that may damage speakers or headphones. THIS DAMAGE IS NOT COVERED BY YOUR WARRANTY. •• The DIGITAL AUDIO OUT terminal may not output some digital audio sources because of copy restrictions. ** Manufactured under license from Dolby Laboratories. Dolby, and the double-D symbol are trademarks of Dolby Laboratories. Connecting a personal computer (PC) With either the PC IN or HDMI connection, you can watch your computer’s display on the TV and hear the sound from the TV’s speakers. To connect a PC to the PC IN terminal on the TV: When connecting a PC to the PC IN terminal on the TV, use an analog RGB (15-pin) computer cable and a PC audio cable. PC audio cable PC audio output Conversion adapter (if necessary) Computer TV back panel • To use a PC, set the monitor output resolution on the PC before connecting it to the TV. The PC IN terminal can accept and display VGA, SVGA, XGA, WXGA and SXGA signal formats. For det...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :