Évaluations - 1, GPA: 3 ( )

Fabricant : Sony Taille : 4.25 mb Nom Fichier : Langue d'enseignement:

• Handle the remote with care. Do not drop or step on it, or spill liquid of any kind onto it. • Do not place the remote in a location near a heat source, a place subject to direct sunlight, or a damp room. 2: Attaching the stand 1 Open the carton box and take out the stand. 2 Release the protection bag and take out the TV set. Push and lift the cover to open. Stand 5 GB Start-up Guide 3 Place the TV set on the stand. Take care not to interfere with cables. 4 Take out the screws from the accessory bag. 5 Fix the TV to the stand using the supplied screws. ~ If using an electric screwdriver, set the tightening torque at approximately 2 N·m (20 kgf·cm) 3: Connecting an aerial/ VCR/ DVD recorder KDL-32P30xx KDL-26P30xx KDL-32U30xx KDL-26U30xx KDL-26S30xx KDL-26S28xx KDL-26T28xx KDL-26T26xx KDL-40P30xx KDL-37P30xx KDL-40U30xx KDL-37U30xx KDL-40P30xx KDL-37P30xx KDL-40U30xx KDL-37U30xx KDL-32P30xx KDL-26P30xx KDL-32U30xx KDL-26U30xx KDL-26S30xx KDL-26S28xx KDL-26T28xx KDL-26T26xx Connecting an aerial only Connecting an aerial/ VCR/ DVD recorder Coaxial cable Scart lead VCR Coaxial cable Coaxial cable Continued 4: Preventing the TV from toppling over 1 Install a wood screw (4 mm in diameter, not supplied) in the TV stand. 2 Install a machine screw (M5 x 12, not supplied) into the screw hole of the TV. 3 Tie the wood screw and the machine screw with a strong cord. 5: Bundling the cables 6: Selecting the language, country/region and location 3,4,5 1 Connect the TV to your mains socket (220-240V AC, 50Hz). 2 Press 1 on the TV (top side). When you switch on the TV for the first time, the Language menu appears on the screen. 3 Press F/ f to select the language displayed on the menu screens, then press . Auto Start Up Language Country Location Select: Confirm: 6 GB 4 Press F/f to select the country/region in which you will operate the TV, then press . Auto Start Up Language Country Location Select: Confirm: Back: If the country/region in which you want to use the TV does not appear in the list, select “-” instead of a country/region. 5 Press F/f to select the location type in which you will operate the TV, then press . Auto Start Up Language Country Location Select: Confirm: Back: Home Shop This option selects the initial picture mode appropiate for the typical lighting condition in these enviroments. 7: Auto-tuning the TV 1 Before you start auto-tuning the TV, insert a pre-recorded tape into the VCR connected to the TV (page 4) and start play back. The video channel will be located and stored on the TV during auto-tuning. If no VCR is connected to the TV, skip this step. 2 Press . Back: Start: Cancel: MENU Do youwant to start automatic tuning? The TV starts searching for all available digital channels, followed by channels. This may press any buttons proceeding. If a message appears for you to confirm the aerial connection No digital or analogue channels were found. Check all the aerial connections and press to start auto-tuning again. 3 When the Programme S...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :