Log:
Évaluations - 4, GPA: 3.8 ( )

Instructions Sony, Modèle KDL-32U3000

Fabricant : Sony
Taille : 4.25 mb
Nom Fichier :
Langue d'enseignement: en
Photos et spécifications   Sony  KDL-32U3000
Aller à la télécharger



Par ce dispositif a également d'autres instructions :
TV - KDL-32U3000 (1.71 mb)
TV - KDL-32U3000 (22.96 mb)
TV - KDL-32U3000 (28.47 mb)
TV - KDL-32U3000 (22.76 mb)

Facilité d'utilisation


Picture No picture (screen is dark) and no sound • Check the aerial connection. • Connect the TV to the mains, and press 1 on the top edge of the TV. • If the 1 (standby) indicator lights up in red, press "/1. No picture or no menu information from equipment connected to the scart connector • Press / to display the connected equipment list, then select the desired input. • Check the connection between the optional equipment and the TV. Double images or ghosting • Check the aerial connection. • Check the aerial location and direction. Only snow and noise appear on the screen • Check if the aerial is broken or bent. • Check if the aerial has reached the end of its serviceable life (three to five years in normal use, one to two years at the seaside). Distorted picture (dotted lines or stripes) • Keep the TV away from electrical noise sources such as cars, motorcycles, hair-dryers or optical equipment. • When installing optional equipment, leave some space between the optional equipment and the TV. • Check the aerial connection. • Keep the aerial cable away from other connecting cables. Picture or sound noise when viewing a TV channel • Adjust “AFT” (Automatic Fine Tuning) picture reception (page 28). Some tiny black points and/on the screen • The picture of a display unit black points and/or bright (pixels) on the screen not indicate a malfunction. No colour on programmes • Select “Reset” (page 22). No colour or irregular colour when viewing a signal from the 3 sockets • Check the connection of the 3 sockets and check if each sockets are firmly seated in their respective sockets. Sound No sound, but good picture •Press 2 +/– or % (Mute). • Check if the “Speaker” is set to “TV Speaker” (page 24). Channels The desired channel cannot be selected • Switch between digital and analogue mode and select the desired digital/analogue channel. Some channels are blank • Scrambled/Subscription only channel. Subscribe to the pay TV service. • Channel is used only for data (no picture or sound). • Contact the broadcaster for transmission details. Digital channels are not displayed • Contact a local installer to find out if digital transmissions are provided in your area. • Upgrade to a higher gain aerial. General The TV turns off automatically (the TV enters standby mode) • Check if the “Sleep Timer” or the “Off Time” are activated (page 26). • If no signal is received and no operation is performed in the TV mode for 10 minutes, the TV automatically switches to standby mode. The TV turns on automatically • Check if the “On Time” is activated (page 26). Some input sources cannot be selected • Select “AV Preset” and cancel “Skip” of the input source (page 27). The remote does not function • Replace the batteries. A channel cannot be added to the Favourite list • Up to 999 channels can be stored in the Favourite list. HDMI equipment does not appear on “HDMI Device List” • Check that your equipment is HDMI control compatible equipment. 34 GB ...

Ce manuel est également adapté pour les modèles :
TV - KDL-26P3000 (4.25 mb)
TV - KDL-26P300H (4.25 mb)
TV - KDL-26P3020 (4.25 mb)
TV - KDL-26P302H (4.25 mb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories