EL VENTILADOR SOLAR PARA ÁTICO Instrucciones de instalación PASO 1 Quite el terminal de alambre ROJO existente del motor y conéctelo con el terminal masculino aislado del termóstato. PASO 2 Instale el terminal femenino aislado del termóstato al terminal masculino en el motor. TERMOSTATO PASO 3 Grabe o ate los alambres a la consola de montaje para prevenir el contacto con la aspa del ventilador. Broan-NuTone LLC Hartford, Wisconsin 800-558-1711 99044566A

Also remove the two plastic hole plugs (see illustration). 4. Install thermostat from back side of front panel and fasten in place, from front, with two screws and washers provided (see illustrations). 5. Attach temperature control knob by gently pushing it on to the thermostat shaft. Flats on shaft and knob must line up for proper installation (do not force control knob onto shaft). 6. Remove black wire from thermal fuse and attach it to thermostat terminal marked “4”. 7. Remove white wire

All electrical work must be done in accordance with local and/ or National Electrical Code as applicable. For safety, this product must be grounded. If you are unfamiliar with methods of installing electrical wiring, secure the services of a qualified electrician. 2. Turn off power at service entrance before installing wiring, servicing, or cleaning this product. 3. Do not install heater upside down or sideways. Heater must be located in the horizontal position. 4. Do not recess louvered face of