Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
HP StorageWorks
About this document
Control er power supply
This document describes the procedure for replacing the power supply
used in MSA1500cs, MSA20, and EVA4x00/6x00/8x00 products.
replacement instructions
NOTE:
Because this component is used in several products, the drawings
may reflect a different enclosure than the one you have. The
removal and replacement procedure is the same for each product.
Warranty information
If the product in which this part is being replaced is stil under
HP warranty, then the replacement part(s) referred to in these
Replacement Instructions is provided under the terms and conditions
of the Hewlett-Packard Company Limited Warranty for that
These instructions apply to the MSA1500cs, MSA20,
product. A copy of this Limited Warranty may be viewed at:
ht p://h18006.www1.hp.com/products/storageworks/warranty.html
and EVA4x00/6x00/8x00 products. The part
may also be used in other HP products. See the
If this is a trade sale part (product out of warranty), then the replacement
part(s) referred to in these Replacement Instructions is provided under
documentation for your specific product for detailed
HP's express limited warranty statement, which may be viewed at:
replacement instructions.
ht p://customerops.corp.hp.com/1sw/pdm_om/warranty_support/
policies/2330100.doc
The replacement part takes on either the Limited Warranty Period of the
part being replaced or a ninety-day period that begins upon installation
of the replacement part, whichever is greater.
The only warranty for this replacement product is as noted above.
Nothing in these replacement instructions should be construed as
constituting an additional warranty. The information provided in these
replacement instructions is provided "AS IS" and HP is not liable for
technical or editorial errors or omissions contained herein.
© Copyright 2005 Hewlett-Packard Development Company, L.P.
Fourth edition June 2007
Before you begin
The information in this document is subject to change without
Observe the following precautions when replacing a power supply:
notice.
• Removing a power supply significantly changes the air flow within
Printed in Puerto Rico
the enclosure. Both power supplies must be installed for the
enclosure to cool properly. If a power supply fails, leave it in place
www.hp.com
in the enclosure until a new power supply is available to install.
• If cabling is obstructing access to the power supply, carefully move
the cables out of the way to avoid loosening any connections.
• Parts can be damaged by electrostatic discharge. Use proper
anti-static protection.
• Have a copy of the product user guide available for reference. You
can download a copy of the user guide from the product support
page on the HP website.
Verifying component failure
Before replacing a power supply, use the following methods to verify
the component failure.
*5697-6789*
Page 1
... Ce manuel est également adapté pour les modèles :
données dispositifs de traitement - HP MSA20 with (12) 500GB SATA and MSA1510i Shelf (569.63 kb)
données dispositifs de traitement - HP MSA20 with (12) 750GB SATA and MSA1500 Shelf (569.63 kb)
données dispositifs de traitement - HP MSA20 with (12) 750GB SATA and MSA1510i Shelf (569.63 kb)
données dispositifs de traitement - HP StorageWorks MSA20 Storage Enclosure (569.63 kb)