|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
HP StorageWorks P4000 G2
Unified NAS Gateway Quick
Before you begin
Make cable connections
Connect to the P4000 G2 Unified NAS
Gateway
Start Guide
Each P4000 G2 Unified NAS Gateway includes 6 NIC connectors. Each
In order to fully implement the HP StorageWorks P4000 G2 Unified NAS
of these NIC connectors is reserved for a specific network connection
Gateway, you must first set up an HP P4000 SAN Solution. The P4000
purpose:
Use either the direct connect or remote management method to connect
G2 Unified NAS Gateway is then connected to the HP P4000 SAN as
to the P4000 G2 Unified NAS Gateway.
described in this document.
• 1 NIC connector is reserved for heartbeat connectivity between the
two P4000 G2 Unified NAS Gateway storage systems.
The HP StorageWorks P4000 SAN Solutions documentation provides
• 2 NIC connectors are reserved for multi-path connectivity into P4000
additional information about creating and managing HP StorageWorks
IMPORTANT:
SAN storage nodes.
P4000 SAN Solutions. Go to http://www.hp.com/go/p4000, click HP
Only the direct attach and remote management access methods
Support and Drivers, select your HP StorageWorks P4000 SAN Solution
• 3 NIC connectors are reserved for front file serving into a client net-
can be used to install the P4000 G2 Unified NAS Gateway.
model, and then click Manuals.
work
After the installation process is complete and the system's IP
In order to set up the cluster environment for the P4000 G2 Unified NAS
address has been assigned, you can then additionally use the
Gateway, you must first connect the hardware components in a
remote browser and remote desktop methods to access the
Overview
fault-tolerant configuration. Using Ethernet cables, make the following
system.
connections:
This document provides instructions for installing the
The HP StorageWorks P4000 G2 Unified NAS Gateway consists of one
• Connect the 2 P4000 G2 NAS Gateway nodes to each other to es-
or more Windows Storage Server systems. These hardware components
• Direct attach — Connect a monitor, keyboard, and mouse directly to
HP StorageWorks P4000 G2 Unified NAS Gateway.
tablish heartbeat connectivity between the two. This connection is
are configured in a clustered environment with a P4000 SAN Solution.
the P4000 G2 Unified NAS Gateway. This access method is mandat-
shown in red.
The P4000 SAN Solution provides iSCSI block services while the P4000
ory if your network does not have a Dynamic Host Configuration
• Connect the P4000 G2 NAS Gateway nodes to a P4000 SAN (5)
G2 Unified NAS Gateway provides data services using the CIFS/NFS
Protocol (DHCP) server.
using standard IP switches (4). These connections are shown in green
protocols. The P4000 G2 Unified NAS Gateway also provides optional
• Remote management — Access the P4000 G2 Unified NAS Gateway
and blue.
data protection services in the form of backup tools HP Data Protector,
using the Integrated Lights-Out 2 remote management method:
Data Protection Manager (DPM), VMWare, and VMware Consolidated
• Connect the P4000 G2 NAS Gateway nodes (3) to the client network
1.
Ensure that a network cable is connected to the iLO 2 port located
Backup (VCB).
(1) using a standard IP switch (2). These connections are shown in
on the back of the P4000 G2 Unified NAS Gateway.
black.
The P4000 G2 Unified NAS Gateway is clustered and connected to the
• Connect the P4000 G2 NAS Gateway power cords (6) to power
2.
Locate the iLO 2 Network Settings tag attached to the P4000
HP P4000 SAN network segment using standard Ethernet IP switches.
outlets.
G2 Unified NAS Gateway and record the default user name,
Up to eight (8) P4000 G2 Unified NAS Gateway nodes can be clustered
password, and DNS name.
together.
• If using iLO2 for remote management, connect an Ethernet cable from
the dedicated iLO2 management port (7) to the network (preferably
3.
From a remote computer, open a standard Web browser and
on the same subnet).
enter the iLO 2 management hostname of the P4000 G2 Unified
IMPORTANT:
NAS Gateway.
© Copyright 2010 Hewlett-Packard Development Company, L.P.
The instructions and illustrations in this document describe the
installation of a 2–node P4000 G2 Unified NAS Gateway. If
edition: November 2010
NOTE:
you purchased the 1–node P4000 G2 Unified NAS Gateway,
By default, iLO 2 obtains the management IP address
The information in this document is subject to change without notice.
all instructions related to configuring the second node of the
solution do not apply to your product. The 1–node solution does
and subnet mask from your network’s DHCP server.
The hostname found on the iLO 2 tag is automatically
Microsoft, Windows, Windows XP, and Windows NT are U.S.
not support full HA capability, but is HA ready and can be
registered trademarks of Microsoft Corporation.
upgraded to a full HA solution by purchasing and installing an
registered with your network’s DNS server.
additional 1–node P4000 G2 Unified NAS Gateway.
www.hp.com
4.
Using the default user information provided on the iLO 2 Network
Settings tag, log on to the P4000 G2 Unified NAS Gateway.
Install the P4000 G2 Unified NAS
For detailed instructions on using each of these access methods, see the
HP Integrated Lights–Out 2 User Guide.
Gateway hardware
1.
Unpack the P4000 G2 Unified NAS Gateway hardware.
2.
Install the P4000 G2 Unified NAS Gateway components into a rack
using the provided rail kits.
Install the rail kit by following the HP Rack Rail Kit installation instructions.
Go to http://www.hp.com/go/p4000, click HP Support & Drivers, select
your product model, and then click Manuals. If the document is not
available, enter HP Rack Rail Kit installation instructions into the Search
field.
*5697-0625*
Figure 1 P4000 G2 Unified NAS Gateway cable connections
.
... Ce manuel est également adapté pour les modèles :
données dispositifs de traitement - HP StoreVirtual 4130 600GB SAS Storage (189.67 kb)
données dispositifs de traitement - HP StoreVirtual 4330 1TB MDL China SAS Storage (189.67 kb)
données dispositifs de traitement - HP StoreVirtual 4330 1TB MDL SAS Storage (189.67 kb)
données dispositifs de traitement - HP StoreVirtual 4330 1TB MDL SAS Storage/S-Buy (189.67 kb)