Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
EML E-Series
HP
Power Supply
StorageWorks
Base Unit
Caution: Parts can be damaged by
Caution: When the library has only
electrostatic discharge. Keep parts in their
one power supply, and this power supply
containers until needed. Ensure that you
is faulty, you must power off the library
are properly grounded when touching
before removing and replacing this
static sensitive components.
power supply.
If the library has two power supplies
(redundant) and only one of them is
faulty, you do not need to power off
the library to replace this power supply.
Note: An animation of the removal
process can be found on the documentation
CD shipped with the tape library.
1
2
EML
Power Supply
HP
nt
Replaceme
StorageWorks
Note: You will find an animation of
this procedure on the documentation
maged by
CD shipped with your library.
Caution: Parts can be da
e that you
electrostatic discharge. Keep parts in their
containers until needed. Ensur
are properly grounded when touching
static sensitive components.
To replace a single
Caution: This part is not hot-pluggable.
It is necessary to power down the library to
: If the faulty
replace this part.ower Supply
Redundant P
power supply is redundant, the library does
power supply, power
not have to be powered off during this
procedure.
2
off the library. If the
1
E
SL
E
-
s
eries
I
n
t
erface
Manager
h
p
1
0
0
26
N
ote: This part is not hot-pluggable.
I
t
is necessary to power down the library
S
torageWorks
t
o
replace this part.
C
aution: Parts can be damaged by
e
lectrostatic discharge. Keep parts in their
containers until needed. Ensure you are
p
r
operly grounded when touching static-
2
s
e
nsitive components.
P
o
wer down the library.
faulty power supply
a.
Place the library off-line by pressing the
S
t
andby button on the library's front panel.
T
he library robotics completes any current
commands and then stops.
b
. Verify that the front panel display indicates
“S
ystem Off-line”.
1
c
.
Verify that the picker is empty. If there is a
t
a
pe cartridge in the picker, perform a Move
c
ommand to place the cartridge in an
available slot. [Content needed.]
d
. Press and hold the power button located on
t
h
e front of the library behind the laptop tray
u
ntil the front panel goes blank.
4
I
n
spect the contents of the kit.
3
is redundant, you
F
l
i
p the two breaker switches off at the power
distribution unit.
Power off the library.
O
pen the back door of the library.
a. Stop all library activity
and ensure that the picker is empty.
b. Open the door at the rear of the rack.
do not have to
c. Set the rack power switch at the upper right
corner to the OFF position.
d. Remove the AC power cords.
Warning: Hazardous voltage is present
in the power supply cavity if the power
power off the library.
cord is not removed.
Inspect the contents of the kit.
a. Stop all library
activity
and ensure that the
picker is empty.
b. Open the doors at the rear of the rack.
c. Set the rack power switch at the upper right
corner to the OFF position.
d. Remove the AC power cords.
Warning: Hazardous voltage is present
in the power supply cavity if the power
Inspect the contents of the kit.
cord is not removed.
... Ce manuel est également adapté pour les modèles :
données dispositifs de traitement - HP EML 103e Tape Library (1.35 mb)
données dispositifs de traitement - HP EML 245e Tape Library (1.35 mb)
données dispositifs de traitement - HP EML Base Library (1.35 mb)
données dispositifs de traitement - HP EML E-Series 103e Base Tape Library (1.35 mb)