Évaluations - 3, GPA: 4
(
)
)
|
Facilité d'utilisation
Be careful, burns or serious injury may occur. CAUTION: Never iron or steam clothes while they are being worn. If the tank runs dry, always make sure you unplug the iron from the outlet before you refill. Self-CleaningSelecting suggest that you self-clean the iron at least once every two weeks to remove scale and calcium. If you know you have very hard water we recommend that you self-clean the iron more often. 1 Set the steam control lever to any steam position. 2 Fill the water tank up to the “MAX” level. Do not overfill. 3 Stand the iron on its heel, standing up on a protected surface and plug into the electrical outlet. 4 Press the Electronic Temperature Control button to “•••” setting. Wait until the iron heats up and the Temperature Indicator lights up. 5 Hold the iron horizontally over the sink. Turn the steam control lever all the way to the right to the SELF CLEAN position. 6 Move the iron back and forth. Hot water and steam will now be ejected from the holes in the soleplate. Use caution when doing this as the water and the steam are hot enough to cause burns. The impurities and scale are washed away. 7 Continue moving the iron back and forth until all the impurities are flushed. 8 Empty the water tank as described on Page 12. Don’t touch the hot surfaces, water or steam because injury may occur. 9 Turn the Steam Control Lever to “0” position when the water tank is empty10 Place the iron back upright on its heel to cool down before storing. 12345639613421 FABRIC TYPELED DISPLAYPANELSTEAMCONTROLBURST OFSTEAMSPRAYPlease note that the symbol above on the label of your garment means that THE ARTICLE CANNOT BE IRONEDNONONOYESYESYESYESYESUse this setting for synthetic fibers such as acrylic, or nylonUse this setting for silk or woolUse this setting for polyesterUse this setting for cotton or linen Trouble ShootingPROBLEMPOSSIBLE REASONS & SOLUTIONSIron doesn’t heat. Iron should be plugged into a 120V AC electric outlet only. Make sure the plug is securely in the socket. Temperature setting might be too low. Try turning to a higher setting. Water droplets coming from steam vents. Variable Steam Control Dial may be set in “self clean” position. Align the dial to the "0" to "Max" steam setting. Iron may not be hot enough. Set temperature to “MAX” position. Always allow iron sufficient time to heat up before activating the variable steam control. Overuse the steam burst. Allow more time between each burst. An odor is being emitted from the new iron or smallparticles arecoming out. This is normal. Follow the instructions for first-time use and allow iron to steam through 2-3 fillings and press the steam burst button occasionally to eliminate small white particles. Iron doesn’t steam. Water tank may be empty or water level is very low. Add water. Make sure the fabric/temperature setting and the variable steam control are correctly set. For maximum steam, set “MAX” on steam control and the temperature setting should be set on “•••.” Steam control di...
Ce manuel est également adapté pour les modèles :Fers - GI468CN 12 (2.53 mb)
Fers - GI468N 10 (2.53 mb)
Fers - GI468CN 10 (2.53 mb)