Évaluations - 4, GPA: 4
(
)
)
|
Facilité d'utilisation
Pass this manual on to whoever might acquire the appliance at a future date. - 1 STEAM IRON KH1281 Basic Safety Instructions Risk of Burning! • Grasp the steam iron only by the handle when the iron is hot. • This appliance is not intended for use by persons (including children) with reduced physical, sensorial or mental cabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. • Children should be supervised to ensure that they do not play with the appliance. • Never hold your hand over the steam spray or on hot metal parts. • You may not open the filler opening of the water reservoir while the iron is in use. Allow the steam iron to cool down first and remove the power plug from the power socket. Fire Hazard! • Never leave the steam iron unattended when it is hot or switched on. • Only ever store the steam iron away once it has cooled down. • Only ever iron with the temperature settings instructed by the care instructions for the material. You could otherwise cause damage to the material. If you do not know the care instructions, start with the lowest temperature setting. • Grasp the steam iron only by the handle when the iron is hot. • Never let children use the steam iron. • Place this iron only on a stable and heat resistant surface. • Use this iron only on a stable and heat resistant surface, for example, on an ironing board. Danger of Electrocution! • The mains voltage at the mains socket must match that shown on the rating plate on the device. • If the connection lead or device does not work perfectly or is damaged, have it examined and repaired immediately at the service centre. • Arrange for defective power plugs and/or cables to be replaced as soon as possible by a qualified technician or by our Customer Service Department to avoid the risk of injury. • Only pull on the power plug and never on the cord. • Never bend (kink) or crush the power cord. Arrange it in such a way that it can not come into contact with hot surfaces and such that no-one can step on it or trip over it. • Always remove the power plug from the power socket after every use and when cleaning or filling. • Always unroll the power cord fully before switching on and do not use an extension cord. • Never touch the cord or the power plug with wet hands. • Under no circumstances should you submerge the steam iron in any liquid or let any liquid into the device casing of the steam iron. You should never expose the appliance to moisture or use the device outside. Should any liquid get into the appliance casing, remove the power plug immediately from the power socket and have the appliance repaired by qualified technicians. • Never use the steam iron near water in the bathtub, shower, wash basin or other vessels. Nearby water presents a danger, even when the appliance is switched off. • You may never open the steam iron casing. Have the defect steam iron repaired by qualified technicians. • Discontinue using the iron if it has fallen down, shows signs of visible damage or leaks water. - 2 Important! • Should the care instructions for a clothing article not mention ironing, (Symbol ), you should not iron that clothing article. You could otherwise cause damage to the clothing article. • You may only fill the water reservoir with tap water. You will otherwise damage the steam iron. • You may not clean the steam iron with solvents, alcohol or abrasive cleaning agents. You could otherwise cause damages. Proper use The steam iron is strictly intended for ironing clothes. You may only use the iron in a closed room and in the private household. All other use is deemed improper use. Before the First Use • Remove the steam iron from the packaging. • Remove all stickers and films from the steam iron and the gliding sole r. Important! Plastic bags can present a danger. To avoid any danger of suffocation, keep this bag away from babies and children. • Plug the power plug into a power socket of 230 V~/50 Hz. • Hold the steam iron horizontally. • Set the temperature control a to the position "MAX“. • Heat the steam iron for several minutes on the highest setting. • Iron on a piece of scrap material to remove any possible unclean patches from the gliding sole r. Operating Elements Figure 1 q Movable cable guide w Temperature control light e Standing foot r Gliding sole t Water nozzle y Filler opening for the water reservoir u Steam amount control i Button for the steam spray o Button for water fog a Temperature control s Handle d Measuring cup Operation Filling with Tap Water • When it is cool, place the steam iron in a horizontal position on its gliding sole r. • Open the filler opening for the water reservoir y. • Fill the reservoir with tap water using the measuring cup d, at most to the "MAX" marking. • Close the water reservoir filler opening y, making sure it "clicks" shut. Plugging In and Ironing Dry ironing without steam is pos...