|
Facilité d'utilisation
Once the iron reaches the selected temperature, it beeps and displays READY (C) . 3-Way Automatic Shutoff The automatic shutoff feature in your iron works as follows: • Once the iron reaches appropriate temperature, it after 30 seconds of inactivity if left on its soleplate on its side. If left vertically on its heel rest, it minutes (D) . • The unit beeps three times and AUTO display window to let you know the (E) . • After a few minutes, the digital • If you pick up the iron, it activates detector and the iron will move the iron or shake on and the set temperature Note: Wait for iron 4 Smart Steam™ Technology The Smart Steam™ system generates steam only at higher temperature settings (between 4 and 6) (F). Once you select the temperature, the Smart Steam™ technology detects the set temperature and adjusts the steam power accordingly. The higher the setting, the more powerful the steam. Surge of Steam • Horizontal Use to remove stubborn creases. 1. With the water tank filled to the MAX mark, set fabric-select dial to appropriate setting (between 4 and 6) for your fabric. Read garment's label to help you determine fabric type. Note: Steam is automatically turned off between settings 1 and 3. 2. Once you select the appropriate setting, wait for iron to beep and display READY. 3. Press the surge-of-steam button to generate a burst of steam (G). For best performance, leave an interval of 5 seconds between bursts. Important: Always stand the iron on its heel rest when powered on but not in use. • Vertical Use for removing wrinkles from hanging clothes and drapes. 1. Be sure the water tank is filled to the MAX mark. 2. Hang the garment to be steamed on a clothes hanger. (Curtains or drapes can be steamed once they are hung.) 3. Set the fabric-select dial to appropriate setting (between 4 and 6) for your fabric. 4. Wait for iron to beep and display READY. 5. Hold the iron close to, but not touching, the fabric. 6. Pull the fabric tight in your free hand and pump the surge-of-steam button as you move the iron over the fabric (H). Important: Always stand the iron on its heel rest when powered on but not in use. Using Spray Use to dampen tough wrinkles at any setting (J). 1. Be sure the iron is filled with water. 2. On first use, pump the spray button several times. ANTI-DRIP SYSTEM The anti-drip system prevents water spotting at low temperatures. Dry Ironing 1. Turn the fabric-select dial to setting 1, 2, or 3 to iron without steam (K). The Smart Steam™ system will automatically turn off and there will not be any steam generated. 2. To dry iron at higher settings, empty the water from the reservoir to prevent steaming. 5 6 Emptying Water Tank (Optional) Note: It is not necessary to empty the water after each use. 1. Unplug the iron and let it cool. 2. To release the water, hold the iron over a sink with the tip pointing down. Water will empty out of the water-fill hole (L). Care and Cleaning This product contains no user-serviceable parts. Refer service ...
Ce manuel est également adapté pour les modèles :Fers - D1200 (1.15 mb)
Fers - D1700 (1.15 mb)
Fers - D1500 (1.15 mb)