Évaluations - 3, GPA: 3.3
(
)
)
|
Facilité d'utilisation
Before operating this iron, please read these instructions completely. This manual should be kept for future reference. It contains instructions to acquaint you with proper operating procedures for your iron. If you have questions, call or write us (include your model and serial numbers and your phone number): Maytag Appliances Sales Company Attn. CAIR® Center P.O. Box 2370 Cleveland, TN 37320-2370 1-877-366-5426 USA 1-800-688-2002 CANADA 1-800-688-2080 USA TTY (for deaf, hearing impaired, or speech impaired) (Mon.-Fri., 8am-8pm Eastern Time) Internet: Table of Contents Safety Instructions ....................................1-2 Controls .........................................................3 Features .........................................................4 Preparing to Iron...........................................5 Setting the Temperature...............................6 Heating the Iron.............................................7 Using Steam Features ..................................8 Using the Spray Function ............................9 After Use/Storage.......................................10 Maintenance.................................................11 Trouble Shooting ........................................12 Warranty.......................................................13 10/02 MCS Part No. 16022001 IMPORTANT SAFEGUARDS When using your cordless steam iron, basic safety precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING 1. Use iron only for its intended use. 2. To protect against a risk of electric shock, do not immerse the iron in water or other liquids. 3. The iron should always be turned OFF before plugging or unplugging cradle cord from outlet. Never yank cord to disconnect from outlet; instead, grasp plug and pull to disconnect. 4. Do not allow cord to touch hot surfaces. Retract cord into cord reel unit when storing. 5. Always disconnect cradle cord from electrical outlet when filling iron with water and when not in use. Be careful to avoid spilling water over iron when filling. 6. Do not operate iron with a damaged cord or if the iron or cradle has been dropped or damaged. To avoid a risk of electric shock, do not disassemble the iron or cradle. Incorrect reassembly can cause a risk of electric shock when the iron is used. 7. Close supervision is necessary for any appliance being used by or near children. Do not leave iron unattended while connected to an electrical outlet or on an ironing board. Always position iron carefully to prevent it from falling if ironing board is accidentally bumped or if cord is pulled. When not in use, always place iron securely into cradle. 8. Burns can occur from touching hot metal parts, the hot surface of the cradle, hot water, or steam. Use caution when turning a steam iron upside down. There may be hot water in the reservoir. SPECIAL INSTRUCTIONS 1. To avoid a circuit overload, do not operate another high-wattage appliance on the same circuit. 2. If an extension cord is absolutely necessary, a 12 ampere cord should be used. Cords rated for less amperage may overheat. Care should be taken to arrange the cord so that it cannot be pulled or tripped over. SAVE THESE INSTRUCTIONS 2 Be sure that these precautions are carefully followed. SAFETY PRECAUTIONS When retracting the electrical cord, keep hold of the plug. If the plug is not held, the uncontrolled moving plug may cause injury. Be sure that your hands and arms do not come into contact with the hot steam. Touching hot steam can cause burns. Do not touch high heat areas, such as the hot soleplate or support area. Touching hot areas can cause burns. Do not direct steam toward people or toward clothes that are being worn by a person. Hot steam can cause burns. Prevent the entry of dust and dirt into the charging pins and contact points area. Be sure that metal objects, such as pins or wires, never come into contact with these areas. Touching the contact points with any pins or wires can cause short-circuiting, electric shock and fire. Do not tilt the iron or shake it rapidly back and forth. These actions can cause hot water to leak from the water inlet / outlet spout, resulting in possible burns. Do not use steel wool or other abrasives to polish the charging pins. This action may result in faulty connections. Do not press the burst of steam button rapidly, over and over again. If the burst of steam button is pressed at intervals of less than 2 seconds, hot water droplets may be discharged, possibly causing burns. Do not pour water onto the iron or cradle. This action may cause a malfunction. Be sure that the soleplate does not come into contact with the surface of the iron cradle or case. This action may deform or damage the surface of the iron cradle or case. CONTROLS 1 3 2 4 Temperature Control Button Off/Auto Off Light Temperature Indicator Lights Burst of Steam Button Steam Button Spray Button Ready Light • Pressing this butt...
Ce manuel est également adapté pour les modèles :Fers - MLI7500AAW (1.73 mb)
Fers - MLI7500AAW (1.73 mb)
Fers - MLI7500AAW (1.73 mb)
Fers - MLI7500AAW (1.73 mb)