Évaluations - 1, GPA: 5
(
)
)
|
Facilité d'utilisation
2. Remove the tank and fill it with water, up to the mark indicating “FULL”. While pressing down the release button, remove the tank. Fill with tap water • Regions that have extremely hard water should use a mixture of 50% tap water and 50% distilled water. • Do not use water treated by household soft water systems, as it contains minerals that are harmful to the iron. • Do not fill the iron with water in excess of the mark indicating “FULL”. If too much water has been poured in, steam will be discharged continuously whenever the iron is placed on the cradle. 3. Close the inlet/ outlet spout lid, then reinstall the tank onto the iron. Push water tank all the way in until it clicks. Click! SETTING THE TEMPERATURE 1. Place the iron on the cradle. 2. Press the steam button down. 3. Press the temperature control button until the desired temperature indicator light is flashing. • The temperature setting cannot be changed unless the iron is on the cradle. • Refer to the Fabric Guide (shown below) to select proper temperature setting. • Irons heat up more quickly than they cool down, so start with lower temperature settings and gradually increase as needed. • When ironing fabric blends, select a temperature setting for the fabric component that requires the lowest temperature. • When ironing fabrics that are especially susceptible to heat, first “test the fabric” by ironing in an inconspicuous area of the fabric. Utilize a pressing cloth as needed. • Be sure to read garment care labels since using improper temperature settings could damage fabrics. Settings Choose the appropriate setting to suit the fabric. • The steam range is indicated for higher temperature settings. • When steam-ironing fabrics that require lower temperature steam than is available with the lowest steam setting, a pressing cloth suitable for use with the particular steam setting should be placed on top of the fabric. Press Wait until the selected light begins to flash. 1. Place the iron on the cradle. 2. Press the steam button down. 3. Press the temperature control button until the desired temperature indicator light is flashing. • The temperature setting cannot be changed unless the iron is on the cradle. • Refer to the Fabric Guide (shown below) to select proper temperature setting. • Irons heat up more quickly than they cool down, so start with lower temperature settings and gradually increase as needed. • When ironing fabric blends, select a temperature setting for the fabric component that requires the lowest temperature. • When ironing fabrics that are especially susceptible to heat, first “test the fabric” by ironing in an inconspicuous area of the fabric. Utilize a pressing cloth as needed. • Be sure to read garment care labels since using improper temperature settings could damage fabrics. Settings Choose the appropriate setting to suit the fabric. • The steam range is indicated for higher temperature settings. • When steam-ironing fabrics that require lower temperature steam than is available with the lowest steam setting, a pressing cloth suitable for use with the particular steam setting should be placed on top of the fabric. Press Wait until the selected light begins to flash. Fabric Guide Setting Synthetics Wool/Silk Linen/Cotton Fabric Type Acrylic Acetate Nylon Silk Wool Rayon Velvet Linen Cotton Polyester Temperature Low Medium High Note: When ironing velvet, use steam but do not let the iron touch the fabric. Test an inconspicuous area first before proceeding. HEATING THE IRON 1. After setting the temperature, allow the iron to preheat on the cradle. The iron will be ready for use once the ready light illuminates, approximately 1 - 2 minutes. • If the temperature setting is changed from high to low during iron operation, the ready light will turn off and the temperature indicator light will begin flashing. The iron will be ready for use once the ready light again illuminates and the temperature indicator light stops flashing. • When the iron is removed from the cradle, the temperature indicator light will turn off. Example: When “linen/cotton” has been selected 2. Be sure that the iron is always placed back on the cradle whenever you take a break from ironing or when you adjust clothes on the ironing board. • The ready light will begin to flash whenever the temperature of the iron starts to decrease. If the temperature continues to decrease, the light will eventually turn off. When this occurs, place the iron back on the cradle for reheating. • The iron will be ready to use once the ready light illuminates. • The most efficient ironing performance will be obtained when the iron is reheated briefly each time the iron is placed on the cradle while adjusting a garment during normal ironing. • When returning the iron to its cradle, never place it in a sideways or backwards position. The contact points will become deformed and the iron will not be able to heat properly. • Steam may occasionally continue to discharge for a short ti...
Ce manuel est également adapté pour les modèles :Fers - MLI7500AAW (1.73 mb)
Fers - MLI7500AAW (1.73 mb)
Fers - MLI7500AAW (1.73 mb)
Fers - MLI7500AAW (1.73 mb)