This will damage the finish. 2. Run the iron over an all-cotton cloth to remove any residue. USING THE SELF-CLEANING FEATURE You should use the Self-Cleaning feature once a month to maintain the optimal performance of your iron. Turn off iron following instructions above. To use the Self-Clean feature: 1. Move the Variable Steam Lever back and forth from (Dry) to (Max Steam) several times to remove debris and minerals from the Variable Steam Valve. This keeps water flowing into the steam chamber

WARNING: The Auto-Off is a safety feature and is not a recommended means for turning your iron off. See “Caring for Your Iron After Use.” MOTION SMART® AUTO-OFF FEATURE (select models only) When the iron is plugged in, the Power Indicator will light steadily, indicating that there is power to the iron. IF YOU LEAVE THE IRON: • in a horizontal position without moving it, or accidentally tip the iron over, it will automatically stop heating after 30 seconds. The Power Indicator will blink to let y

The Power Indicator will blink to let you know that the iron has stopped heating. IMPORTANT: The Power Indicator will continue to blink until the iron is unplugged or reset. TO RESET THE IRON: Move the iron back and forth and allow it to reheat for 2 minutes. The indicator will stop blinking and the iron will start heating again. WARNING: Motion Smart® Auto-Off is a safety feature, not a recommended means for turning your iron off. See “Caring for Your Iron After Use” for information on turning

• Do not immerse the appliance in water or any other liquid unless recommended. If you have any concerns regarding the performance and use of your appliance, please visit or contact the Sunbeam Consumer Service Line. Ensure the above safety precautions are understood. Features of your Ultura Dry Iron LongcordwithswivelcordoutletTheswivelcordoutletisidealforleftorrighthanduse,andprovidesgreaterversatilityandeaseofmovementwhenironing.Theflexiblegrommetprotectsthecordfromfraying. Temperatureindicat

To Use the SHOT OF STEAM” Feature: 1. Press the SHOT OF STEAM” button several times to prime the pump. 2. Place the iron on top of the wrinkle and press the SHOT OF button each time you would like an extra burst of steam. The SHOT OF feature may be used continuously with just a short pause between shots. Vertical Steam (Model 3030 only) The vertical steam feature allows your iron to function as a garment steamer. Tip: When using the vertical steam on clothing, hang the clothing on a clothes hang

The SHOT OF STEAM® feature may be used continuously with just a short pause between shots. VERTICAL STEAM (select models only) allows your iron to function as a garment steamer. Tip: When using vertical steam on clothing, hang the clothing on a clothes hanger for best results. Hanging curtains and drapes may also be steamed. To use Vertical Steam: 1. Make sure that the iron has heated up (2 minutes). 2. Hold the iron in a vertical position, with the iron close to but not touching the fabric you

Plug the cord into a 120-Volt AC outlet. 3. Select the fabric setting you desire (Synthetic, Silk, Linen, Cotton or Wool). Allow the iron to heat for 2 minutes. While the iron is heating, make sure it is sitting on its heel rest on a stable, protected surface. 4. Allow the iron to heat for 2 minutes, and then turn the Steam Lever to the appropriate setting. IMPORTANT: When not ironing, always set the Steam Lever to (Dry) and the Fabric Select to OFF. USING THE IRON’S SPECIAL FEATURES SPRAY MIST®

Take it to an authorized service center for examination and/or repair. Incorrect reassembly can cause a risk of electric shock when the iron is used. Close supervision is necessary for any appliance being used by or near children. Do not leave iron unattended while connected or on an ironing board. Burns can occur from touching hot metal parts, hot water or steam. Use caution when you turn a steam iron upside down there may be hot water in the reservoir. If the iron is not operating normally, di

When rocking the iron, dip the nose of the iron slightly below the rear of the iron to make certain the water circulates completely. Release Self-Clean button after one minute. 8. Turn the iron upside down and allow the remaining water to flow out of the fill hole. 9. Dry the soleplate with a towel. 10. Plug in the iron and set the Fabric Select to Linen. Let the iron heat for 2 minutes to dry out the iron completely. 11. Set the Fabric Select to the Off, unplug the iron, and allow it to cool. P

Hanging curtains and drapes may also be steamed. To use the vertical steam: 1. Make sure that the iron has heated up (2 minutes). 2. Hold the iron in a vertical position, with the iron close to but not touching the fabric you want to steam. 3. With your other hand, pull the fabric tight. 4. Press the SHOT OF STEAM” button at 2-second intervals as you move the iron across the wrinkled area. WARNING: To prevent the risk of burns. keep your hand away from the area being steamed. WARNING: DO NOT ste