Log:
Évaluations - 3, GPA: 3.3 ( )

Instructions Indesit, Modèle 790.4283

Fabricant : Indesit
Taille : 1.83 mb
Nom Fichier : 60af544e-bf32-4936-8d24-63c0d929ae9d.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


DO NOT TOUCH HOT COOKWARE or PANS directly with hands. Always use oven mitts or pot holders to protect hands from burns. DO NOT SLIDE Cookware across the cooktop surface. Doing so may permanently damage the appearance of the ceramic cooktop. INCORRECT CORRECT • Cookware not centered on • Cookware centered correctly on Cooking Zone surface. Cooking Zone surface. • Curved or warped pan bottoms or • Flat pan bottom & straight sides. sides. I_ Min. size -_J I_-Min. size --_1 Pan does not meet the minimum • Pan size meets or exceeds the size required for the Cooking recommended minimum size for Zone used (See Fig. 19). the Cooking Zone (See Fig. 19). • Pan bottom rests on cooktop trim • Pan rests completely on the or does not rest completely on the Cooktop surface. cooktop surface. • Heavy handle tilts pan. • Pan is properly balanced. Fig. 2 PLEASE NOTE -ANY one of the incorrect conditions listed above in Fig. 2 may be detected by the sensors located below the ceramic cooktop surface. If the cookware does not meet any of these conditions, one or more of the Cooking Zones will not heat indicated by a flashing power level display. Correct the problems before attempting to reactivate the cooktop. Before Using the Cooktop Prior to using your cooktop for the first time, apply the recommended cooktop cleaning creme (on the web visit for replacement cleaner, item number 40079) to the ceramic surface. Buff with a non-abrasive cloth or no-scratch cleaning pad. This will make cleaning easier when soiled from cooking. The special cooktop cleaning creme leaves a protective finish on the glass to help prevent scratches and abrasions. Setting Cooktop Controls Using the Touch Control Be sure that your finger is placed in the center of the touch pad. If the finger is not placed on the center of a pad, the cooktop may not respond to the selection made. Lightly contact the pad with the flat part of your entire fingertip. Do not just use the narrow end of your fingertip. Operating the Cooking Zones The Induction cooktop has four or five Cooking Zones designed for cookware of various sizes. Be sure to place cookware that meets the minimum and maximum pan size requirements (see Fig. 2, page 7) for the Cooking Zone desired and is best for the amount of food being prepared. Place the cookware with the prepared food on the Cooking Zone BEFORE setting any of the Cooktop controls. To Turn ON one or more of the Cooking Zones: 1. Place the prepared food using the correct type and size cookware on the desired Cooking Zone. Be sure to center the cookware on Cooking Zone completely covering the minimum ring marked on the Zone surface. PLEASE NOTE: If the cookware requirements for the Cooking Zone (See Fig. 2, page 8) are not met the sensors will detect a problem and the display will flash with the power level in the affected Cooking Zone Alpha-Numeric display. Any problems must be corrected before proceeding. 2. Touch and hold the _ key pad for 2 seconds (or until a b...

Ce manuel est également adapté pour les modèles :
Hobs - 790.4283 (1.83 mb)
Hobs - 790.4292 (1.83 mb)
Hobs - 790.4283 (1.83 mb)
Hobs - 790.4283 (1.83 mb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories