Log:
Évaluations - 4, GPA: 4.3 ( )

Instructions Vermont Casting, Modèle DVB4136

Fabricant : Vermont Casting
Taille : 152.21 kb
Nom Fichier :
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


Logs are fragile and easy to break. Handle with care. 6. Remove all the lava rock from the firebox floor. Save for later. 7. Remove the deflector inside the firebox just behind the glass. Save the screws. 8. Place the rear panel over the ledge of the rear log support bracket. You may need to loosen the screws securing the bracket. Re-tighten the screws after placing the ceramic panel in place. 9. Place one of the side panels into place. It will hold the rear panel secure. 10. Place the other side panel into place. 11. Reinstall the deflector using the saved screws. 12. Re-install the lava rock. (Refer to Homeowner’s Manual) 13. Reinstall the logs. (Refer to Homeowner’s Manual) 14. Reinstall the glass frame window and close the clamps. 15. Installation is complete. 16. Attach the top louvre (Refer to Homeowner’s Manual), turn ON the gas supply and electrical supply, light the unit and close the bottom louvre. _CFM Corporation_ 410 Admiral Blvd. • Mississauga, Ontario, Canada L5T 2N6 800-668-5323 • 10009406 6/07 Rev. 2...

Ce manuel est également adapté pour les modèles :
Ventilateurs - DVA4136 (152.21 kb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories