Construction to meet all requirements of NFPA 96 and NSF Standard No. 2. Hood to incorporate full-length semi-concealed grease gutter with a removable grease cup. Filters to be U.L. Classified stainless steel baffle type, mounted at a 45 degree angle. Hood shall be equipped with a full length stainless steel finished back. Hood Without Fire Damper: Hood shall be U.L. Listed under the category "Exhaust Hood without Exhaust Damper." Specify one of the following ovens when ordering hood: Single Dec

Exhaust and supply fans require a magnetic starter switch with 120 volt holding coil. Coils (exhaust and supply) should be electrically interlocked for simultaneous operation. FIRE PROTECTION NFPA Standard No. 96 and local codes require a fire extinguishing system for protection of the duct collar and plenum of nonwaterwash ventilators. Hood shall be designed to accommodate piping for Ansul R-102 fire suppression (plenum and duct protection). Fire protection system provided by HVAC contractor or

PLEASE READ THIS ENTIRE MANUAL BEFORE OPERATING THE UNIT. If you have any questions, please contact your BKI Distributor. If they do not answer your questions, contact the BKI Technical Service Department, toll free: 1-800927- 6887. Outside the U.S., call 1-864-963-3471. Safety Precautions Always follow recommended safety precautions listed in this manual. Below is the safety alert symbol. When you see this symbol on your equipment, be alert to the potential for personal injury or property damag