In Canada, your appliance is warranted by WCI Canada, Inc. *NORMAL RESPONSIBILITIES OF THE CONSUMER EXCLUSIONS IF YOU NEED SERVICE This warranty applies only to products in ordinary household use, and the consumer is responsible for the items listed below: 1. Proper use of the appliance in accordance with instructions provided with the product. 2. Proper installation by an authorized servicer in accordance with instructions provided with the appliance and in accordance with all local plum

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES CUSTOMER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR OR REPLACEMENT AS PROVIDED HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW, BUT NOT LESS THAN ONE YEAR. ELECTROLUX SHALL NOT BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPEN

2. Align the flat sides on the spigot with the recesses in the top of the casing. Insert and snap fix the spigot into the casing. 3. Connect the 100mm (4 ins) ducting to the spigot and make an air tight seal. 4. Remove the charcoal filters. Recirculation The cooker hood is supplied specified for use in the recirculation mode with the charcoal filter/s fitted. In the recirculation mode contaminated air is passed through the charcoal filter/s to be purified and recirculated into the kitchen throug

A minimum clearance height of 685mm (27”) is required when installed above a slot-in electric oven, or 787mm (30 1/2 ”) when installed above a slot-in gas oven. When installed between adjoining wall cabinets, the wall cabinets must not overhang the hob and the distance between the underside of the cabinet and the worktop must be 450mm. If the height of the wall cabinet is less than 450mm a gap of 50mm must be maintained either side of the hob. This cooker hood must not be installed above a cooki

These hoods are specially conceived for combi steamers. The models detailed on this sheet are 4 hoods for 6 and 10 GN 1/1 and 10 GN 2/1 combi steamers, available in static or ventilated version. HOODS FOR COMBI STEAMERS ZANUSSI PROFESSIONAL FUNCTIONAL AND CONSTRUCTION FEATURES ♦ Built in AISI 304 stainless steel. ♦ Static models:they have to be connected through canalization to a remote extractor. ♦ On model with built-in fan, a built-in humidity sensor automatically activates the venti

These hoods are specially conceived for combi steamers. The models detailed on this sheet are 4 hoods for 6 and 10 GN 1/1 and 10 GN 2/1 combi steamers, available in static or ventilated version. HOODS FOR COMBI STEAMERS ZANUSSI PROFESSIONAL FUNCTIONAL AND CONSTRUCTION FEATURES ♦ Built in AISI 304 stainless steel. ♦ Static models:they have to be connected through canalization to a remote extractor. ♦ On model with built-in fan, a built-in humidity sensor automatically activates the venti

These hoods are specially conceived for combi steamers. The models detailed on this sheet are 4 hoods for 6 and 10 GN 1/1 and 10 GN 2/1 combi steamers, available in static or ventilated version. HOODS FOR COMBI STEAMERS ZANUSSI PROFESSIONAL FUNCTIONAL AND CONSTRUCTION FEATURES ♦ Built in AISI 304 stainless steel. ♦ Static models:they have to be connected through canalization to a remote extractor. ♦ On model with built-in fan, a built-in humidity sensor automatically activates the venti

The system guarantees the correct aspirated air flow based on different working conditions as well as high energy savings. ♦ All models need a direct and indipendent expulsion of the air to the outside. ♦ Endowed with “Dedalus” labyrinth filter based on the fat centrifugal filtration. The particular deflector elements disposition forces the intake air to change direction several times. The air fattest particles bump against filter elements and deposit on their internal sides. The labyrinth fil